492696
6
Zoom out
Zoom in
Previous page
1/64
Next page
6
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
GERMERING, GERMANY
ONKYO EUROPE ELECTRONICS GmbH
I. MORI
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
Precautions
For European model
This unit contains a semiconductor laser sys-
tem and is classified as a “CLASS 1 LASER
PRODUCT”. So, to use this model properly,
read this Instruction Manual carefully. In case
of any trouble, please contact the store
where you purchased the unit.
To prevent being exposed to the laser beam,
do not try to open the enclosure.
This label on the rear panel states that:
1. This unit is a CLASS 1 LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed,
do not remove the cover. Refer servicing
to qualified personnel.
For British model
Replacement and mounting of an AC plug on
the power supply cord of this unit should be
performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead
of this apparatus may not correspond with
the coloured markings identifying the termi-
nals in your plug, proceed as follows:
The wire which is coloured blue must be con-
nected to the terminal which is marked with
the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
IMPORTANT
A 5 ampere fuse is fitted in this plug. Should
the fuse need to be replaced, please ensure
that the replacement fuse has a rating of 5
amperes and that it is approved by ASTA or
BSI to BS1362. Check for the ASTA mark or
the BSI mark on the body of the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR HOME
THEN THE FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED
INTO ANY 13 AMPERE SOCKET.
If in any doubt, please consult a qualified
electrician.
Trademarks
Apple, Mac, Power Macintosh, and Power-
Book are registered trademarks and iBook
and iMac are trademarks of Apple Corpora-
tion, Inc. Microsoft and Windows are regis-
tered trademarks of Microsoft Corporation,
Inc.
Memory backup
The CR-N1 uses a special battery-less memory
backup system in order to retain the radio
presets and other settings when it’s
unplugged or in the case of a power failure.
Although no batteries are required, the
CR-N1 must have been plugged in in order to
charge the backup system. Once it has been
charged, the CR-N1 will retain its settings for
several weeks, although this depends on the
environment and will be shorter in humid cli-
mates.
“CLASS 1 LASER
PRODUCT
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CR-N1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CR-N1 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info