492679
32
Zoom out
Zoom in
Previous page
1/40
Next page
En-32
Using the Timer
The CD receiver has a programmable timer for
automated playback, and a sleep timer for turning the
CD receiver off after a specified period.
You can also use the alarm playback function of your
iPod/iPhone to initiate timer playback on the CD
receiver.
The timer can be used to start FM/DAB, CD, iPod/USB,
or LINE playback at a specified time. You could, for
example, use a timer to turn on the CD receiver every
morning, just like a radio alarm clock.
Note:
If iPod is selected as the input source for the timer
settings, USB will play if only a USB flash drive is
connected, and iPod/iPhone will play if an iPod/
iPhone is connected.
Notes:
You must set the clock before you can program the
timer.
If you don’t operate any buttons for 5 seconds while
programming a timer, the procedure will be cancelled
and the previous display will reappear.
When the CD receiver is turned on by the timer,
playback will begin with the most recently received
station in the case of FM/DAB, the first song in the
case of a CD or iPod (USB), and the current state of
the connected device in the case of LINE.
Only one timer can be set.
1
Prepare the source that you want the timer
to play.
If you want FM/DAB to play, tune to the station
you want to hear.
If you want a CD to play, insert the disc.
For an iPod/iPhone, place it in the dock. If you’re
using a USB flash drive rather than an iPod/iPhone,
disconnect the iPod/iPhone from the iPod dock
(see page 30).
If you want to play a device connected to LINE,
make settings on the connected device so that it
will start playing when the timer operates.
2
Press the [TIMER] button repeatedly until
“Timer XX” appears.
“XX” indicates the source that was last selected for
timer playback.
3
Use the arrow []/[] buttons to select the
source, and then press [ENTER].
You can select the following sources:
CD, iPod (USB), FM/DAB, LINE.
In the display, “TIMER” and a number indication
will blink according to the input source you’ve
selected.
The number will be “1” for FM/DAB, “2” for CD,
“3” for iPod (USB), and “4” for LINE.
4
Use the arrow []/[] buttons to specify the
“hour” at which you want the timer to play,
and then press [ENTER].
5
Use the arrow []/[] buttons to specify the
“minute” at which you want to timer to play,
and then press [ENTER].
6
Use the arrow []/[] buttons to select
“Timer On,” and then press the [ENTER]
button.
When a timer is turned on, its TIMER and number
appears on the display.
If there is no operation for several seconds, the
setting will be made with the currently-shown
content.
The display will return to its previous state except
for “TIMER” and the number of the selected input
source; the timer is now set.
7
Press the [ ON/STANDBY] button or the
remote controller’s [] button to set the CD
receiver to Standby.
Programming the Timer
M
F
/
H
ENTER
TIMER
DISPLAY
Tim„„er„„ F„„M„„ „„
Tim„„er„„--„„:„„--„„
Tim„„er„„ 6„„:„„00„„
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo CR-245DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo CR-245DAB in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info