686357
172
Zoom out
Zoom in
Previous page
1/312
Next page
40
Funzione di controllo
Problema Controllare Rimedio
La funzione di
controllo non
funziona.
Il cavo HDMI è collegato
correttamente?
Per usare la funzione Control, collegare il televisore a
schermo piatto ed il sistema AV (ricevitore o amplicatore
AV, ecc.) e il Convertitore AV HD al terminale HDMI OUT.
Il cavo HDMI usato è un
cavo High Speed HDMI
®
/
TM
?
Usare un cavo High Speed HDMI
®
/
TM
. La funzione Control
potrebbe non funzionare correttamente se viene utilizzato
un cavo HDMI diverso da High Speed HDMI
®
/
TM
.
Control with HDMI è
impostato su On sul
lettore?
Impostare Control with HDMI su On sul lettore.
Il dispositivo collegato
supporta la funzione
Control?
• La funzione Control non funziona con dispositivi di altre
marche che non la supportano, anche se si usa un cavo
HDMI.
• La funzione Control non funziona se dei dispositivi che
non la supportano vengono collegati fra dispositivi
compatibili con Control ed il lettore.
• Vedere Collegamenti a componenti di altre marche che
supportano la funzione Control a pagina 13.
• Alcune funzioni potrebbero non funzionare anche se
l'unità è collegata ad un prodotto Onkyo compatibile con la
funzione Control. Consultare anche le istruzioni per l'uso
del dispositivo collegato.
Problema Controllare Rimedio
Durante la riproduzione
di segnali DTS Digital
Surround dal terminale
DIGITAL AUDIO OUT
(
OPTICAL
) si sentono
dei disturbi.
Il ricevitore o amplicatore
AV collegato è compatibile
con DTS Digital
Surround?
Se al terminale DIGITAL AUDIO OUT (
OPTICAL
) è
collegato un ricevitore o un amplicatore AV non
compatibile con DTS Digital Surround, impostare DTS
Digital Surround e HDMI Surround su PCM.
Il terminale DIGITAL
AUDIO OUT
(
OPTICAL
) non è in
grado di emettere
segnali audio digitali
a 192 kHz o 96 kHz.
• L'audio protetto da diritti d'autore è convertito a 48 kHz
prima di essere emesso.
• Impostare Max Sampling Frequency a 96 kHz o
192 kHz.
L'audio secondario o
interattivo non viene
emesso.
HDMI Audio è impostato
correttamente?
Quando si ascolta audio da un terminale HDMI OUT,
impostare HDMI Audio su Reencode o PCM.
Digital Output è impostato
correttamente?
Quando si ascolta audio da un terminale DIGITAL AUDIO
OUT (
OPTICAL
), impostare Digital Output su Reencode o
PCM.
Dopo aver caricato il
disco, Loading
rimane visualizzato e
la riproduzione non
inizia.
Ci sono troppi le
registrati sul disco?
Se si carica un disco che contiene dei le, il tempo
richiesto per la sua riproduzione dipende dal numero di le
presenti.
■ appare nei nomi dei
le, ecc.
I caratteri non visualizzabili dal lettore appaiono come ■.
Quando si immettono caratteri tramite media e periferiche,
ecc., i caratteri comprendenti parzialmente o
completamente caratteri semplicati non vengono
visualizzati correttamente.
Un messaggio che
indica memoria
insufciente appare
durante la
riproduzione di un
BD-ROM.
• Collegare un dispositivo USB.
• Cancellare i dati memorizzati nel dispositivo USB
collegato da BUDA Setup.
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 40 2015/10/20 14:37:03
172


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo BD-SP353 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo BD-SP353 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info