686357

Onkyo BD-SP353 Manual

40
Zoom out
Zoom in
Previous page
1/312
Next page
40
Control Function
Problem Check Remedy
Control function
does not work.
Is the HDMI cable
properly connected?
To use the Control function, connect the Flat Screen TV,
and AV system (AV receiver or amplier, etc.) and HD
AV Converter to the HDMI OUT terminal.
Is the HDMI cable you
are using a High Speed
HDMI
®
/
TM
Cable?
Use a High Speed HDMI
®
/
TM
Cable. The Control function
may not work properly if an HDMI cable other than a
High Speed HDMI
®
/
TM
Cable is used.
Is Control with HDMI set
to On on the player?
Set Control with HDMI to On on the player.
Does the connected
device support the
Control function?
• The Control function will not work with devices of other
brands that do not support the Control function, even
when connected using an HDMI cable.
• The Control function will not work if devices that do not
support the Control function are connected between the
Control-compatible device and the player.
• See About connections to components of other makes
supporting the Control function on page 13.
• Even when connected to an Onkyo product compatible
with the Control function, some of the functions may not
work. Also refer to the operating instructions of the
connected device.
Problem Check Remedy
Noise can be heard
when outputting DTS
Digital Surround
signals from the
DIGITAL AUDIO OUT
(OPTICAL) terminal.
Is the connected AV
receiver or amplier
compatible with DTS
Digital Surround?
If an AV receiver or amplier that is not compatible with
DTS Digital Surround is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal, set DTS Digital
Surround and HDMI Surround to PCM.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
AUDIO OUT
(OPTICAL) terminal.
• Copyright-protected audio is converted to 48 kHz or
less before output.
• Set Max Sampling Frequency to 96 kHz or 192 kHz.
Secondary audio or
interactive audio is
not output.
Is HDMI Audio properly
set?
When listening to the sound from an HDMI OUT
terminal, set HDMI Audio to Reencode or PCM.
Are Digital Output
properly set?
When listening to the sound from a DIGITAL AUDIO
OUT (OPTICAL) terminal, set Digital Output to
Reencode or PCM.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
Are there too many les
recorded on the disc?
When a disc on which les are recorded is inserted,
depending on the number of les recorded on the disc,
loading may take several dozen minutes.
■ is displayed in le
names, etc.
The characters that cannot be displayed on this player
are displayed in ■. When you are input characters via
media and peripheral equipment, etc., the characters
which include simplied character of part or all simplied
character is no true display.
A message
indicating low
memory appears
while playing a
BD-ROM disc.
• Connect a USB device.
• Erase the data stored on the connected USB device
from BUDA Setup.
SN29402235_BD-SP353_EnFrEsItDeNlSv_1510xx.indb 40 2015/10/20 14:36:36
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo BD-SP353 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo BD-SP353 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info