462124

Onkyo A-933 Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
17
Enjoying Audio Sources
If the A-933 is connected to other components via
, press the remote controller’s [ON] button once
to turn on the A-933, and press it again to turn on the
other components.
Turning on all system components simultaneously:
You can set the A-933 so that all connected compo-
nents are turned on with just one press of the remote con-
troller’s [ON] button or the A-933’s [STANDBY/ON]
button. To do this, turn on the A-933, and then press and
hold the remote controller’s [ON] button for 16 seconds
until the A-933 switches to Standby mode. You will then
be able to turn on the A-933 and all system components
with just one press of the remote controller’s [ON] but-
ton or the [STANDBY/ON] button on any system com-
ponent.
Notes:
• The A-933 is shipped with the POWER switch in the
ON position ( ). When the power cord is connected
for the very first time, the A-933 will go on Standby,
and the STANDBY indicator will light up.
•To completely shut down the A-933, set the POWER
switch to the OFF position ( ).
Selecting Speaker Set A or B
You can select which set of speakers outputs sound, or
you can use both sets at the same time.
To output sound from the speakers connected to the
SPEAKERS A terminals, press the SPEAKERS [A]
button. The indicator above that button will light up. If a
subwoofer is connected, that too will output sound.
To output sound from the speakers connected to the
SPEAKERS B terminals, press the SPEAKERS [B]
button. The indicator above that button will light up. If a
subwoofer is connected, that too will output sound.
To output sound from all connected speakers, press the
SPEAKERS [A] and SPEAKERS [B] button so that
both indicators are on.
Turning On the A-933
1
Press the [POWER] button.
The STANDBY indicator lights up.
2
Press the [STANDBY/ON] button.
Alternatively, press the remote control-
ler’s [ON] button.
The A-933 turns on and the
STANDBY indicator lights up green.
Note:
When it’s turned on, the A-933 outputs
no sound for about five seconds. This
allows the circuits to stabilize.
To turn off the A-933, press the
[STANDBY/ON] button. The A-933
will enter Standby mode.
TUNER
PHONO
C D
M D
TAPE /CDR
LINE
STANDBY/ON
POWER
PHONES
TO N E
(
R
)
DIRECT
(
G
)
MAIN IN
SUPER BASS BASS
MAX
TREBLE
SPEAKERS
BA
OFF
ON
TAPE
/
CDR
CD
MD
ON
STANDBY
FM AM CLEAR
78
9
10/0
>
10
4
56
231
GROUP
STANDBY(R)
ON(G)
POWER
STANDBY/ON
ON
STANDBY
STANDBY indicator
POWER
OFFON
STANDBY/ON
ON
Remote
controller
Listening to Components
1
Turn the input selector to select
the component that you want to
listen to.
TAPE/CDR
: Select to hear the compo-
nent connected to the TAPE/CDR IN
jacks.
MD
: Select to listen to the component
connected to the MD IN jacks.
LINE:
Select to listen to the compo-
nent connected to the LINE jacks.
CD:
Select to listen to the component
connected to the CD jacks.
TUNER:
Select to listen to the compo-
nent connected to the TUNER jacks.
PHONO:
Select to listen to the turnta-
ble connected to the PHONO jacks.
TAPE
/
CDR
PRESET
VOLUME
VOLUME
CD
MD
PRESET
SLEEP
ON
STANDBY
FM AM CLEAR
78
9
10/0
>
10
4
56
231
GROUP
TIMER
ENTER
MUTING
TUNER
PHONO
C D
M D
TAPE /CDR
LINE
STANDBY/ON
STANDBY(R)
ON(G)
POWER
PHONES
TO N E
(
R
)
DIRECT
(
G
)
MAIN IN
SUPER BASS BASS
MAX
TREBLE
SPEAKERS
BA
OFF
ON
MUTING
SPEAKERS A, B
VOLUME
/
Input selector
Volume
TUNER
PHONO
C D
M D
TAPE /CDR
LINE
*En_A933_02.fm Page 17 Tuesday, January 25, 2005 1:46 PM
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-933 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-933

Onkyo A-933 User Manual - German, Dutch - 68 pages

Onkyo A-933 User Manual - French, Italian - 68 pages

Onkyo A-933 User Manual - Swedish - 68 pages

Onkyo A-933 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info