492684
13
Zoom out
Zoom in
Previous page
1/32
Next page
13
En
Note
Make sure that the wires do not touch metal parts on the back
panel or elsewhere.
Y plugs cannot be connected.
Two sets of speakers (Speakers A and Speakers B) can be
connected to the integrated amplifier. You can select which
speakers to output audio to when listening to music.
You can also output audio from both sets of speakers.
If you use Speakers A or Speakers B, make sure to use speakers
with an impedance of 4 to 16 ohms. If you use Speakers A and
Speakers B, make sure to use speakers with an impedance of
8 to 16 ohms. Connecting speakers with an impedance less than
8 ohms may cause the protection circuit to activate.
When using only one speaker, or when playing back monaural
audio, don’t connect a single speaker to both the left and right
speaker terminals.
Pay close attention to speaker wiring polarity. In other words,
connect positive (+) terminals only to positive (+) terminals, and
negative (–) terminals only to negative (–) terminals. If you get
them the wrong way around, the sound will be out of phase and
will feel unnatural.
Be careful not to short the positive and negative wires. Doing so
may damage the integrated amplifier.
Make sure the metal core of the wire does not have contact with
the integrated amplifier’s rear panel. Doing so may damage the
integrated amplifier.
Don’t connect more than one speaker wire to a single speaker
terminal. Doing so could damage the integrated amplifier or
cause it to malfunction.
Bi-wiring Connection
Bi-wiring provides improved bass and treble performance.
Using terminals of both SPEAKERS A and
SPEAKERS B, it separates high frequency from low
frequency signals.
Tip
As shown on the illustration, the wiring terminals of
SPEAKERS A are connected to the tweeter and
SPEAKERS B are connected to the woofer. However, wiring
them the other way around is also possible.
Important:
Bi-wiring can be used only with speakers that support bi-
wiring and that have an impedance of 4-16 ohms.
When making the bi-wiring connections, be sure to remove
the jumper bars that link the speakers’ tweeter (high) and
woofer (low) terminals.
When making the bi-wiring connections, set SPEAKERS to
A+B ( page 22).
Right
speaker
Left
speaker
Tweeter (high)
Woofer (low)
Integrated Amplifier
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9050 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9050

Onkyo A-9050 User Manual - German, Dutch - 116 pages

Onkyo A-9050 User Manual - French - 60 pages

Onkyo A-9050 User Manual - Italian, Swedish - 116 pages

Onkyo A-9050 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info