492685
19
Zoom out
Zoom in
Previous page
1/32
Next page
19
En
The PHONO input jacks are for use with moving-magnet
(MM) type cartridges.
Use an analog audio cable to connect the PHONO L/R
jacks to the audio output jacks on the turntable, as shown.
Tip
If the turntable has a ground wire, connect it to GND terminal.
With some turntables, connecting the ground wire may cause
hum, in which case it should be disconnected.
If the turntable has a moving-coil (MC) type cartridge, you’ll
need a commercially available MC phono preamp. In this case,
connect the turntable to the phono preamp’s input, and connect
the phono preamp’s output to the PHONO L/R jacks.
Tip
Connect your cassette tape deck to either of the following jacks:
LINE IN 1/2/3/4.
Note
Volume adjustments and use of the muting function are not
reflected in the signal output from LINE OUT.
Manual tone adjustments using the BASS –/+ controller,
TREBLE –/+ controller, BALANCE L/R controller, direct
function, and phase matching bass function are not reflected in
the signal output from LINE OUT.
See the manual of the recording component for instructions on
correct use.
Connecting a Turntable
Connecting a Cassette Tape Deck
L
R
AUDIO
OUTPUT
Ground wire
Integrated Amplifier
AUDIO
OUT
LR
Integrated Amplifier
Cassette tape deck
Connecting a Recording Component
Important:
Unless you have the full consent of the copyright holder,
copyright laws prohibit using your recordings for anything
other than personal enjoyment!
Do not change the integrated amplifier’s input while
recording. Doing so will cause the audio from the selected
component to be recorded.
AUDIO
IN
LR
Integrated Amplifier
Cassette tape deck
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9030 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9030

Onkyo A-9030 User Manual - German, Dutch - 116 pages

Onkyo A-9030 User Manual - French - 60 pages

Onkyo A-9030 User Manual - Italian, Swedish - 116 pages

Onkyo A-9030 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info