492685
7
Zoom out
Zoom in
Previous page
1/32
Next page
7
En
Before Using the Integrated Amplifier
Note
If the remote controller doesn’t work reliably, try replacing the
batteries.
Don’t mix new and old batteries or different types of batteries.
If you intend not to use the remote controller for a long time,
remove the batteries to prevent damage from leakage or
corrosion.
Remove expired batteries as soon as possible to prevent damage
from leakage or corrosion.
To use the remote controller, point it at the integrated
amplifier’s remote control sensor, as shown below.
Note
The remote controller may not work reliably if the integrated
amplifier is subjected to bright light, such as direct sunlight or
inverter-type fluorescent lights. Keep this in mind when
installing.
If another remote controller of the same type is used in the same
room, or the integrated amplifier is installed close to equipment that
uses infrared rays, the remote controller may not work reliably.
Don’t put anything, such as a book, on the remote controller,
because the buttons may be pressed inadvertently, thereby
draining the batteries.
The remote controller may not work reliably if the integrated
amplifier is installed in a rack behind colored glass doors. Keep
this in mind when installing.
The remote controller will not work if there’s an obstacle
between it and the integrated amplifier’s remote control sensor.
Install the integrated amplifier on a sturdy rack or shelf.
Position it so that its weight is evenly dispersed on its four
legs. Do not install the integrated amplifier in a place with
vibration or an unstable location.
The integrated amplifier is designed to have high conversion
efficiency, however, its temperature will become much
higher than other audio equipment.
Therefore, make sure
not to hamper heat dissipation by ensuring proper
ventilation.
Installing the Batteries
1
To open the battery compartment, press the small
hollow and slide the cover.
2
Insert the two supplied batteries (R03/AAA) in
accordance with the polarity diagram inside the
battery compartment.
3
Replace the cover and slide it shut.
Using the Remote Controller
Installing the Integrated Amplifier
Remote control sensor
Integrated amplifier
Approx. 16 ft. (5 m)
Approx. 8 in.
(20 cm)
Ensure proper ventilation.
Approx. 8 in.
(20 cm)
Approx.8in.(20cm)
Approx. 4 in.
(10 cm)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Onkyo A-9030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Onkyo A-9030 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Onkyo A-9030

Onkyo A-9030 User Manual - German, Dutch - 116 pages

Onkyo A-9030 User Manual - French - 60 pages

Onkyo A-9030 User Manual - Italian, Swedish - 116 pages

Onkyo A-9030 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info