Manual OneConcept CTR1 - 10029736 (page 9 of 26) (English, German, French, Italian, Spanish)

670199

Zoom out

Zoom in

1/26

Use and Operation

1. When using the appliance, make sure that it is on a at and stable surface. Damage may occur if

it is placed on an incline or decline, and put the ice box into water tank:

2. Insert the plug directly into a standard AC socket-outlet. Be sure plug ts tightly into outlet.

3. Turn the timer knob to ON position

4. Press the LO/MI/HI button to set the desired fan speed (Low/ Medium/High).

5. VANE button: If you want to enlarge blast area in your room, press the vane button, the fan will

blast your room in large scope; the vane light will be illuminated. To stop vane, just press the

vane button again, the vane pilot light will go out. Moving the horizontal louvers either up or down

can make further wind direction enhancements.

5-1. UP DOWN VANE button: Press the „ UP DOWN VANE „ button once or more, set up the outlet

starting page or stop swinging around air supply, at the same time corresponding instructions

icon light or go out.

5-2. LEFT RIGHT VANE button: Press the „ LEFT RIGHT

VANE „ button once or more, outlet yawing page star-

ting or stopping air supply bobbing up and down, and

the corresponding instructions icon light or go out.

6. TIMER button: Set the time by pressing the timer button to select a desired timing level as follow,

the range is between 0.5-9 hours. The pilot light corresponding to the selected timing level will

be illuminated.

7. MODE button: The default setting is Normal wind, and then you can press the button Mode again

to choose your desired wind mode as per the following sequence: The wind mode selecting can

be circulated and the wind mode pilot lamp will be on during the fan mode in operating.

8. COOL button: Please noted that the COOL LAMP will ashing when you press the Cool button if

there is no or lacked water in water tank.

8-1. Before operating the unit in Cool mode, make sure the escape valve for the water tank is

properly xed. Then proceed to add clean water into the water tank. While adding the water,

make sure that you keep an eye on the water level indicator to make sure that you do not OVER

or UNDER FILL the unit. Press the button Cool after you have added the water and the unit should

commence to blow cooler air. The cool light will light on at the same time. When you press the

button Cool again, it will stop working, the cool light will also go out.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept CTR1 - 10029736 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OneConcept CTR1 - 10029736 Manual

Product: