719454

OneConcept 10032326 Manual

21
Zoom out
Zoom in
Previous page
1/64
Next page
21
EN
where ‘X’ is the number of the preset (1-10).
Tune to a DAB staon preset
1 Press and release the Preset button. ‘Preset Recall’ is displayed together
with the number of the current preset location.
2 Turning the select knob to select the Preset location and station that you
would like to listen to (1-10).
3 Press and release the Select knob. The Speaker will tune to that station
and begin to play.
FM RADIO
1. Press Source button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range
(87.50MHz).
Otherwise, the last listened FM station will be selected.
3. Press button to scan down the frequency band. Your Radio will search
for the next available station and then stop on that station.
4. Press the > or < button to ne tune each frequency in 0.05MHz steps, if
necessary.
Changing the scan seng
1. Press and hold the Menu/Info button to enter the menu options. ‘<Scan
setting>’ will be displayed. Press and release the Select button. There are
now two different options to choose.
a. Strong stations The scan will only stop when a strong signal strength is
received which should also result in a better audio quality. It is possible
that the station you are scanning for may be missed using this option.
a. All stations
The scan will stop for every station it receives, even if the signal strength
is poor.
2. Turning the Select Knob to your want options, Press and release the Select
button to conrm.
3. Press and release the Menu/Info button to exit from the Menu.
Storing an FM staon preset
Your Speaker can store up to 10 FM radio stations in its preset memories for
instant access to your favourite stations.
1. Tune the Speaker to the FM radio station that you wish to preset.
2. Press and hold the Preset button for approximately 2 seconds until ‘Save
to Preset’ is displayed.
3. Turning the select knob to select the Preset location that you would like to
store the radio station to (1-10).
4. Press and release the Select knob. The display will conrm ‘Preset X saved’,
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OneConcept 10032326 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept 10032326 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info