719391
14
Zoom out
Zoom in
Previous page
1/41
Next page
14
Shut o alarm
When alarm goes o, press the STANDBY BUTTON to turn o alarm, the alarm will reset
for next day.
How to turn o the alarm
To cancel the alarm mode: In “STANDBY OFF” mode, press AL.SET button to turn o the
alarm function (until alarm sign „
“ disappears on the LCD Display).
Adjust volume
Press VOL.+ button to increase the volume during “STANDBY ON” mode.
Press VOL. – button to decrease the volume. “STANDBY OFF”
Radio operation
1. Drücken Sie die Standby-Taste, um in den Betriebs-Modus zu wechseln.
2. Drücken Sie die Funktions-Taste, um in den Radio-Modus zu wechseln.
3. How to use the buttons for radio - Manual Tuning: Touch the SKIP+ / SKIP- button to
search for desired frequency. Higher frequency can be selected by touching the SKIP+
button while Lower frequency can be selected by touching SKIP- button - Automatic
Tuning: Touch & hold the SKIP+ / SKIP- button until the display frequency starts run OR
long press the SKIP button to activate Automatic Tuning OR when a station of sucient
strength has been found Tuning will stop or you can stop the automatic tuning by pres-
sing SKIP+ / SKIP- button.
4. To turn o the radio, Press the STANDBY button.
Preset Tuning
Select your desired station according to the normal tuning procedure.
Press the MEMORY button on the remote, “P-01” will appear and ash on the display, Then
use M+ or M- button on the remote, or touch the PRESET button on the unit to change the
number where the station will be stored. (P01 to P20).
Store the current frequency by pressing MEMORY button on the remote again when you
get the desired number. Repeat the same procedure to set other desired frequencies into
Memory No.1 to No.20. NOTE: The unit can be preset up to 20 stations.
Memory recall
Recall the stored frequencies by pressing M+ or M- BUTTON on the remote, or touch the
PRESET button on the unit to select 1 to 20 stations as desired. NOTE: As stored frequen-
cies can only be stored for long time with the power supplying. The station you stored will
be lost and can not be recalled in case that you cut o the power.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OneConcept 10021808 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept 10021808 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info