Manual OneConcept 10006738 - DB004 (page 11 of 11) (English, German)

777154

Zoom out

Zoom in

1/11

Washing Method for Woolen Fabric

For fine woolen fabric, the purely made of rabbit long hairs and wool. Don'twash them directly in the

tub.

1. Select water level for introducing water inlet; put warm water of below 50°C and select proper

water level.

2. Putting in washing agent:for the washing agent, please refer to washing agent for woolen

fabric.In order nit to damage the fabric of pure animal hairs. Please use neutral washing agent

without ferment.

3. Putting in washings: woolen washings should be put into the net and washed on their reverse

sides.

5. Washing:wash them flow for 2min then introduce water to rinse them for 2min, take them

out,flatten them and keep them in good shape. Don't dry them in the sun but dry them in

cloudy days.

Washing Capacity

Water level

Water flow

Below 2,0 kg

Middle

Standard

Below 1,0 kg

Low

Method for Woolen Blanket

Washing pure woolen blanket and electric blanket are absolutely forbidden.

1. Fold the blanket four times in upright direction, then roll it up and put it into the net bag.

2. Put the blanket into the washing tub and press it lightly with hand so as to make it full of water

and sink down to the water bottom.

3. According to the weight and volume of the blanket,adjust the water level.

4. Select washing time and start washing. Sometimes the washings . Would make water inside the

tube spilling out. It is better to cover the tub with the lid.

Maintenance

1. Please pull the plug out of the socket( don't touch the socket when your hands are wet)

and put it at the correct position.

2. After discharging the water in the tub,please move the switch from discharge to standard.

3. Clean the de-hair device:

1) Take out the de-hair set,dismantle it with a finger pressing the inside bottom.

2) Put the de-hair set in water to clwan.

3) After clwaning,restore the de-hair device,insert it into the slat wnder the water level side

board. A click should be heard.

4. Pick up the water introducing tube and hang the discharging tube.

5. Clean the housing of the machine, wipe it thoroughly,and wipr out the dirt with chemicals,such

as alcohol, eradicator,acetone,gas.etc.When it is very dirty,please use neutralliquid soap to clean.

6. Close the lid, placed the machine at the ventilation in the room.

Water is not allowed to enter the inner part of the machine directly. Otherwise, the electric motor will be

conducted by electricity. This is the real reason why sometimes that electric shock may happen.

For appliances with type Yattachment, the instructions shall contain the substance of the following. If the

suply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept 10006738 - DB004 in the language / languages: English, German as an attachment in your email.

The manual is 0.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

OneConcept 10006738 - DB004 Manual

Product: