719475
14
Zoom out
Zoom in
Previous page
1/31
Next page
14
Protection circuit
this amplier is provided with a protection circuit that operates in the following cases:
when the unit is overheated
when a DC current is generated
when the speaker terminals are short circuited.
The PROTECTOR indicator lights up in red and the unit will shut down.
lf this happens, turn o the connected equipment, take out the cassette tape or disc, and
determine the cause of the malfunction, lf the amplier has overheated, wait until the unit
cools down before use.
Making connections
Mind the following hints before making connections:
Before making any connections, disconnect the ground terminal of the car battery to
avoid short circuits,
Be sure to use speakers with an adequate power rating, If you use small capacity
speakers, they may be damaged.
Do not connect the „-“ terminal of speaker system to the car chassis and do dot con-
nect the „-“ terminal of the right speaker with that of the left speaker.
ln stall the input and output cords away from the power supply lead as running them
close together can generate some interference noise.
This unit is a high powered amplier. Therefore, it may not perform to its full potential
if used with the speaker cords supplied with the car.
lf your car is equipped with a computer system for navigation or some other purpose,
do not remove the ground wire from the car battery. If you disconnect the wire,
computer memory may be erased. To avoid short circuits when making connections,
disconnect the +12v power supply lead until all the other leads have been connected..
Fuse replacement
If the fuse blows, check the power connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal malfunction. In such a case, consult
your nearest goods dealer.
When replacing the fuse, be sure to use one matching the amplier stated above the
fuse holder, Never use a fuse with an amperage rating exceeding the one supplied with
the unit as this could damage the unit
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OneConcept 10000345 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OneConcept 10000345 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info