Manual One for All URC-9960 (page 8 of 44) (English)

492757

Zoom out

Zoom in

1/44

ADJUSTING BRIGHTNESS

The OFA Kameleon 8-Device Remote has five

levels of brightness adjustment and is set to the

middle one at the factory.To increase or decrease

the brightness, perform the following steps:

1. Press and hold SETUP until the two bottom

IR segments flash twice. The Program Keys

will appear.

NOTE: If the display turns off because of inactivity,

you will need to start the programming sequence

again by repeating this step.

2. Press (Brightness) once.The Brightness

programming screen will appear:

• To increase brightness, press ▲ one or

more times.

• To decrease brightness, press ▼one or

more times.

3. When the desired brightness is achieved,press

HOME twice to exit programming and return

to the last-selected device menu screen.

NOTE: Otherwise, to program other features, press

HOME only once to return to the Program Keys.

PROGRAMMING DEVICE CONTROL

The OFA Kameleon 8-Device Remote is preset at

the factory to operate the following devices:

• Motorola Cable Box (using the AUX key)

• Philips Tivo PVR (DVR)

• Pioneer CD Player and Audio Receiver

• RCA TV,VCR, and Satellite Receiver

• Toshiba DVD Player

To control devices other than the default brands,

perform the following steps; otherwise skip

this section:

NOTE: To control a DVD Player/VCR Combo, perform

the instructions in “Programming DVD Player/VCR

Combo Control” on the page 10.

1. Turn on a desired device (e.g.,VCR or DVD

player) and, if applicable, insert media (e.g.,

cassette or disc).

NOTE: Please read steps 2 through 9 completely

before proceeding. Before starting step 2, review

the “Manufacturer’s Codes”(starting on page 24).

Brands are listed alphabetically in order of most

popular ones first.Highlight or write down the

devices and the codes you wish to program.

2. Press and hold SETUP until the two bottom

IR segments flash twice. The Program Keys

will appear as SETUP flashes repeatedly.

NOTE: If the display turns off due to inactivity,

the remote control will exit programming and

return to the last-selected device menu screen.

To start programming again,repeat this step.

NOTE: To stop programming at any time,press

HOME once to return to the Program Keys screen.

Press HOME once more to exit completely.

3. Press DEV SET once. The Device Setup

programming screen will appear (as shown on

the next page):

KAMELEON 8-DEVICE REMOTE

8 Adjusting Brightness/Programming Device Control

OFA Kameleon UG 5/8/03 3:22 PM Page 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-9960 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-9960 Manual

Product: