Manual One for All URC-8910 (page 15 of 63) (English)

492760

Zoom out

Zoom in

1/63

SEARCHING FOR YOUR CODE (continued)

NOTE: In the manual search mode, the URC-8910 remote

control will send IR codes from its library to the selected

device, starting with the most popular code first.

7. If the device (e.g., TV) turned off,skip to the next

step. If it did not turn off, aim the URC-8910 remote

control at the device (e.g., TV) and press the ▲ key

once to advance the manual search to the next code

(e.g., TV and 0054).Again you will see the LED (red

light) blink and the (IR) icon flash.

Repeat this step as often as needed until you find a

code that turns off the device.

8. To save the working code, press SELECT once. The

display will confirm your entry with [SUCCESS] and

then [EXIT SETUP].

The URC-8910 remote control will return to

normal operation.

NOTE: For future reference, write down the working device

code in the appropriate boxes on page 11.

9. To perform a manual code search for another

device, repeat steps 1 through 8, but this time (in

step 5) substitute the appropriate device key for the

device you are searching for.

NOTE: If you have not found a working device code after trying the above

procedure, please contact our customer service center to upgrade your

One For All A/V LCD 8-Device With Learning Universal Remote Control

(URC-8910). See “About Upgrading” on page 51.

Producer 2002 IR Mnl 4/4/02 10:01 AM Page 28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-8910 in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-8910 Manual

Product: