Manual One for All URC-8910 (page 12 of 63) (English)

492760

Zoom out

Zoom in

1/63

PROGRAMMING TV/VCR COMBO CONTROL

Perform the following instructions to control a TV/VCR Combo:

1. Turn on the TV/VCR Combo and insert a video

cassette.

NOTE: Please read steps 2 through 9 completely before pro-

ceeding. Highlight or write down the codes and device you

wish to program before starting step 2.

2. On the URC-8910 remote control, press and hold

SET until you see the display change from the cur-

rent device and time to [CODE SET].

NOTE: The device, its code, and time are examples.Your

remote control settings may be different.

NOTE: To exit programming at any time, press EXIT once or

allow 30 seconds of inactivity to lapse.You will see [EXIT

SETUP] as the remote control returns to normal operation.

NOTE: [INVALID] means you have inadvertently pressed an

incorrect key. Note your error and continue programming.

3. Press SELECT once to begin programming.You will

see the display change to the last-selected device

and its current code (e.g., TV and 0051)

4. Press VCR once.You will see the display change to

[VCR] and its current code.

5. Use the Setup Codes For TV/VCR Combos (on

page 22) to locate the type of device and brand

name. Then use the keypad to enter the first four-

digit code for your device and press SELECT once.

For example,to enter the first Sony TV/VCR Combo

code on page 23, press 0 four times and then

SELECT once.

If the code is entered correctly,you will see the

[SUCCESS] message.

NOTE: If your TV/VCR Combo has a separate TV code, you

will also need to perform step 6.

Producer 2002 IR Mnl 4/4/02 10:01 AM Page 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-8910 in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-8910 Manual

Product: