492802

One for All URC-8820N Manual

3
Zoom out
Zoom in
Previous page
1/34
Next page
3
Key Charts
The LED (red light), which is located
underneath the POWER Key, blinks
to show that the remote control is
working and is sending signals.
Press TV, CBL/SAT, VCR, DVD, CD,
PVR, AUD, or AUX once to select a
desired home entertainment device
to control.
Press POWER once to turn on or
off the selected device. For master
power control, see “Programming a
Master Power Macro.”
Press MENU once to display your
selected device’s main menu.
Use GUIDE to display your selected
device’s program guide or setup
menu.
Use EXIT to exit from your selected
device’s guide or menu.
Use INFO to display the current
channel and program information.
Use the Cursor Keys to move the
cursor in the program guide and
menu screens.
Use OK to choose options from your
selected device’s menu or guide.
In the RCVR/AMP mode, use OK to
set the surround sound. Use the up
arrow (or down arrow ) to adjust
the volume higher (or lower).Use
the left arrow (or right arrow) to
adjust the balance left (or right).
Use VOL + (or VOL -) to raise (or
lower) the sound volume.
Press MUTE once to turn the sound
off or on.
In TV, VCR, DVD, or CBL/SAT modes, use FAV to scan favorite
channels and/or all channels. (See “Using Channel Scan” and
“Programming Favorite Channel Scan.”)
Use CH + (or CH -) to select the next higher (or lower) channel.
Press PREV once to recall the last-viewed channel and to page back
one screen on the main menu. In the AUD, DVD and CD modes, use
DISC to change disk (if available on your device).
Use the keypad (1 ~ 9 and 0) to directly select channels (e.g., 009 or
031). In the AUD mode, use the keypad (1 ~ 9 and 0) to select audio
sources 1 through 10.
Press ENTER once after entering the channel numbers on some TVs.
In the CD mode, use ENTER to add 10 to the digit entry (e.g.,
ENTER and 7 is 17).
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC-8820N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-8820N in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info