Manual One for All urc 8550 topline 8 (page 26 of 40) (English)

122680

Zoom out

Zoom in

1/40

CHANNEL UP/DOWN SIMULATION

If your original remote control did not have channel up/down keys, it is

possible to program the Topline 8 to operate this feature. By following the

instructions below, you will be able to use the Channel+/- keys on the

Topline 8 to advance though channels 0 through 9.

To turn on the Channel +/- Simulation feature:

Press and hold MAGIC until the display reads [TIMED

SEQ].

Press the Menu- key twice until the display changes to

[CONFIGURE]. Press ENTER and the display will change to

[THEATR SEL].

Press the Menu+ key one time until the display changes

to [CH +/- SIM]. Press ENTER and the display will read

[DISABLE].

Press Menu- one time to change the display to [ENABLE]

then press ENTER.

Advanced Functions

Note: To reset the Topline 8 back to the original channel +/- operation,

repeat steps 1-4 above. During step 4, use the Menu- to choose [DISABLE],

then press ENTER.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 8550 topline 8 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All urc 8550 topline 8 Manual

Product: