122714

One for All urc 8350 energy saver Manual

10
Zoom out
Zoom in
Previous page
1/152
Next page
Within a certain device mode you can program your URC-8350 to issue a
sequence of commands at the press of one key.
Example: To program a macro on the LAST key to go to “AV” mode (in TV
mode) then to channel 801 of your Set-Top-Box.
1. Press and release TV key to select the mode where you
want to execute the macro.
2. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-8350’s LED (red light)
blinks twice (the LED will blink once and then twice).
3. Press 9 9 5. The LED will blink twice.
4. Then press the LAST key (to which the Macro will be
assigned).
5. Next press TV then AV then STB then 8 0 1 to select the
desired channel on your Set-Top-Box.
6. To store the Macro, press and hold the OK key until the
LED will blink twice.
Result: In TV mode, when you press and hold the LAST key the URC-8350 will
send commands to go in “AV” mode then switch to STB mode and go to
channel 801 of your Set-Top-Box.
- If you need to build in some delay into the sequence please use the
corresponding device-mode key (e.g. STB key in example above) to do so.
You may press this key several times to build in more delay.
- Each MACRO can consist of a maximum of 32 key strokes.
- Make sure that you program a Macro on a spare key, as the Macro will
overwrite the pre-programmed function in the mode where the Macro is
programmed.
- If you had to hold down a key for a few seconds on the original remote
control to get a function, this function may not work in a macro on your
URC-8350 remote.
Erasing the Macro
Example: To erase the Macro from the LAST key in STB mode, press:
1. Press and release the device key (e.g. STB key) to select the
mode where the macro is stored.
2. Press and hold down REWIND + FASTFORWARD
simultaneously until the URC-8350’s LED (red light)
blinks twice (the LED will blink once and then twice).
3. Press 9 9 5. The LED will blink twice.
4. Press the LAST key (from which you want to erase the
macro).
5. To clear the Macro, press and hold the OK key until the
LED will blink twice.
Extra Features
WWW.ONEFOR ALL.COM 9
Macros (Sequence of commands within a certain mode)
URC_8350_V_1_19feb08.qxd:Ofa5_Digital_URC7555_EURO_10_Talen 20-02-2008 16:07 Pagina 9
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 8350 energy saver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 8350 energy saver in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info