585195

One for All URC 8210 - Kameleon 10 Manual

16
Zoom out
Zoom in
Previous page
1/247
Next page
WWW.ONEFORALL.COM 15
The KAMELEON 10 comes with a complete library of pre-programmed codes.
After you have set up the KAMELEON 10 for your device, you may find that
there are one or more keys that you had on the original remote control, which
do not have a place on the KAMELEON 10 keypad.
The
KAMELEON 10 offers a special Learning feature that allows you to copy
almost any function from your original remote control onto the keypad of the
KAMELEON 10.
Before you start:
- Make sure your original remote is working correctly.
- Make sure neither your
KAMELEON 10, nor your original remote
control is pointing at your device.
Learning (direct)
Example: To copy the “mono/stereo” function from your original TV
remote control onto the ”A”-key of your KAMELEON 10.
1. Place the KAMELEON 10 and your original remote control on a flat
surface. Make sure the ends which you normally point at your device
are facing each other. Point the original remote to the front of the
KAMELEON 10 (see picture below). Keep the remotes at a
distance of 2 to 5 cm (0.8 to 2 inches).
2. Press and hold down the MAGIC key
(for about
3 seconds) until the rabbit comes out of the hat
(the screen will change to the setup screen).
3. Press IR LEARN.
4.
Press the device key (Example: TV1 key) on the KAMELEON 10
remote to select the mode to which you want to copy the
learned function.
5. Press the key (Example: ”A” key) on the KAMELEON 10 remote
where you want to place the learned function. The IR Indicator
will blink three times and then the display will switch off.
6. Press and hold the key that you want to copy (Example:
mono/stereo) on your original remote control. The display
switches back on and you will see two blinks to indicate
successful learning operation.
7. If you want to copy other functions within the same mode, simply repeat
steps 5 and 6 pressing the next key you want to copy by learning. If you
want to copy another function in a different mode, simply continue with
step 4 followed by steps 5 and 6.
8. To exit the learning mode and return to the user screen, press
the ESC key twice.
Learning Feature
(How to copy functions from your original working remote onto the
KAMELEON 10)
(x2)
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 8210 - Kameleon 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 8210 - Kameleon 10 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info