Manual One for All urc 8040 kameleon 4 (page 18 of 35) (English)

122576

Zoom out

Zoom in

1/35

18 WWW.ONEFORALL.COM

4. Make sure that your device is switched on.

5. Press the device key (TV or SAT/CBL).

6. Now, press and release the MAGIC key, then press POWER. This will set the

Sleeptimer for 15 minutes. For each keypress of the POWER key the ”zZz”

animation will appear. To increase the timer by 15 minutes, simply press

POWER again (this must be done within 10 seconds). You can press POWER

up to a maximum of four times which will set the timer to 60 minutes

(4x15).

7. Once you have set the timer to the desired time, set your KAMELEON 4

down, pointing it at your device. When the programmed amount of

time has elapsed, the KAMELEON 4 will send the command for POWER,

hence turning off your device.

- While in sleeptime mode, the display will be turned off.

- The ”zZz” animation (next to the POWER key) will animate every 15 seconds

indicating that the remote is in sleeptimer mode.

- To deactivate the Sleeptimer, simply press any key on the KAMELEON 4

remote. This will also turn the display back on.

- Remember, when using the KAMELEON 4 Sleeptimer, you must set the

remote so it is pointing at your device.

- The KAMELEON 4 Sleeptimer can only be set for only one device at a time.

Macros (sequence of commands)

Macros (direct)

You can program your KAMELEON 4 to issue a sequence of commands at the

press of one button. For example, you may want to turn off your TV, VCR and

Satellite at the same time. Any sequence of commands you regularly use can be

reduced to one key stroke for your convenience. A key that is programmed with

a Macro works through all modes (provided it’s accessible in that mode).

Therefore a Macro should only be set on the MACRO key. However, you can

install a Macro on any key, except for the device keys (TV, VCR, SAT/CBL and

DVD), the MAGIC key and the SCREEN key.

Example: To set up a Macro that switches off your TV, VCR and SAT/CBL on the

“MACRO” key on your KAMELEON 4:

1. Press and hold MAGIC until the rabbit comes out of the hat.

2. Press 9 9 5.

3. Then press the key to which the Macro will be assigned, in this case the

“MACRO” key.

4. Next press TV, POWER, VCR, POWER, SAT/CBL, POWER.

5. To store the Macro, press and hold MAGIC until you get two blinks on

the IR Indicator and the rabbit disappears.

6. Whenever you press the “MACRO” key, the KAMELEON 4 will turn off your

TV, VCR and Satellite receiver.

Extra Features

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 8040 kameleon 4 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All urc 8040 kameleon 4

One for All urc 8040 kameleon 4 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 170 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All urc 8040 kameleon 4 Manual

Product: