122576

One for All urc 8040 kameleon 4 Manual

11
Zoom out
Zoom in
Previous page
1/35
Next page
WWW.ONEFORALL.COM 11
The KAMELEON 4 comes with a complete library of pre-programmed codes.
After you have set up the KAMELEON 4 for your device, you may find that there
are one or more keys that you had on the original remote control, which do not
have a place on the KAMELEON 4 keypad.
The KAMELEON 4 offers a special Learning feature that allows you to copy
almost any function from your original remote control onto the keypad of the
KAMELEON 4.
Before you start:
- Make sure your original remote is working correctly.
- Make sure neither your KAMELEON 4, nor your original remote
control is pointing at your device.
Learning (direct)
Example: To copy the “mono/stereo” function from your original TV
remote control onto the ”16:9”-key of your KAMELEON 4.
1. Place the KAMELEON 4 and your original remote control on a flat sur-
face. Make sure the ends which you normally point at your device are
facing each other. Point the original remote to the front left side of
the KAMELEON 4 (see picture below). Keep the remotes at a
distance of 2 to 5 cm (0.8 to 2 inches).
2 Press and hold down the MAGIC key (for about
3 seconds) until the rabbit comes out of the hat.
3. Press 9 7 5. The bottom part of the animated
IR Indicator will blink twice.
4. Press the device key (Example: TV key) on the KAMELEON 4
remote to select the mode to which you want to copy the
learned function.
5. Press the key (Example: ”16:9” key) on the KAMELEON 4
remote where you want to place the learned function. The IR
Indicator will show “incoming IR” three times and then the
display will switch off.
6. Press and hold the key that you want to copy (Example:
mono/stereo) on your original remote control. The display
switches back on and you will see two blinks to indicate
successful learning operation.
7. If you want to copy other functions within the same mode, simply repeat
steps 5 and 6 pressing the next key you want to copy by learning. If your
want to copy another function in a different mode, simply continue with step
4 followed by steps 5 and 6.
8. To exit the learning mode, press and hold down
the MAGIC key (for about 3 seconds) until the
bottom part of IR Indicator blinks four times.
Learning Feature
(How to copy functions from your original working remote onto the
KAMELEON 4)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 8040 kameleon 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 8040 kameleon 4 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of One for All urc 8040 kameleon 4

One for All urc 8040 kameleon 4 User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info