585193

One for All URC 7990 Manual

3
Zoom out
Zoom in
Previous page
1/149
Next page
1
) Find the code for your device in the (included) Code List.
Codes are listed by device type and brand name. The most
popular code is listed first. Make sure your device is
s
witched ON (not on standby).
2
) Press and hold the “Settings Icon” for 3 seconds.
The Setup screen will appear.
3) Press “Extra”. The device keys will appear.
4) Select the DEVICE you wish to set up (e.g. TV).
5) Enter the 1st code listed for your device type & brand
(e.g. Samsung TV = 2051). The “Power Ring” will light up
twice.
This feature allows you to Copy one or more functions from your original (working) remote control onto your Infinity remote.
E
xample: How to learn (copy) the “TOP MENU“ function from your original DVD remote onto the “A” key on your
I
nfinity remote control.
1) Place both remote controls (the Infinity remote and your original remote) on a flat surface. Make sure the
ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5
cm. Align both remotes also in height.
6) First; Press the ”A” key. The Power ring will show “incoming IR”
three times and then the display will switch off.
Then; Press the “Top Menu” key on the original remote. The “Power Ring”
will light up twice to confirm successful learning
1) Press and hold the “Settings Icon” for 3 seconds.
The Setup screen will appear.
2) Press “Search”. The device keys will appear.
3) Select the DEVICE you wish to set up (e.g. TV).
4) Point the remote at your device. Now the remote will
send a different POWER OFF signal (automatically
every 3 seconds) going through all the brands stored in
the memory. This will take max. 10 minutes. Press and
release the “check mark” (tick) as soon as your device
switches OFF. READY!
6) Now, aim the Infinity Remote at your device and press POWER.
If your device switches OFF, the Infinity remote should be ready to operate your device.
If your device still does NOT switch OFF, please repeat steps 1 - 6 trying the next code listed for your brand.
Problems & Solutions
Your device switched OFF but you still cannot control your device? Switch your device back ON manually
(or using the original remote) and repeat Direct Code Set trying the next code listed for your brand.
Your Infinity Remote, controls your device but some keys don’t work properly? There may be a better configuration
for your brand. Please repeat Direct Code Set trying the next code listed for your brand .
If NOT successful? Follow the Auto Search instructions or go to www.simpleset.com
ATTENTION: If your original remote control did not have a power key please press “pause” instead at step 6. Please start a
dvd/mp3 playing before performing Direct Code Set up.
Problems & Solutions
Your device switched OFF but you still cannot control your device? Switch your device back ON manually (or using
the original remote) and repeat Auto Search making sure to press and release the “check mark” (tick) as soon as your
device switches OFF.
Your Infinity Remote, controls your device but some keys don’t work properly? There may be a better configuration
for your brand. Please repeat Auto Search. Auto Search will select the next configuration for your brand. Make sure to
press and release the “check mark” (tick) as soon as your device switches OFF. You can also find your brand at
www.simpleset.com.
T
he Auto Search allows you to find the code for your device by scanning through all the codes contained in the memory
of the Infinity. The Auto Search may also work if your brand is not listed at all.
2) Press and hold the “Settings Icon” for 3 seconds.
The Setup screen will appear.
3) Press “Copy”. The device keys will appear.
4) Select the corresponding DEVICE key (e.g. DVD).
5) * Press the DVD key again to access the second screen
where the “A” key is situated.
(*) Skip this step if the corresponding functions can
be found on the first screen.
7
) Congratulations! You successfully copied the “Top Menu” function from your original
remote control onto your Infinity remote control. NOW whenever you press the “A” key (in DVD mode)
you will obtain the “Top Menu” function.
8
) If you want to copy other functions, simply repeat
step 6 for each key you want to copy. When you have finished,
p
ress the Settings keys to return to the user mode.
H
ow to delete a learned function to obtain the original function?
e.g how to delete a copied function from the “A” key;
1) Press and hold the “Settings Icon” for 3 seconds. The Setup screen will appear.
2) Press “Copy”. The device keys will appear.
3) Press the corresponding DEVICE key (e.g. DVD).
4)* Press DVD again to access the second screen.
5) Press and hold the ”A” key for 3 seconds. The “Power Ring” will blink twice.
(*) Skip this step if the corresponding functions can be found on the first screen.
New models and even brands are being launched every day. Fortunately your Infinity remote can be updated
via the internet, ensuring it will never become obsolete. For access to over 6,000 brands and 300,000 models, please
visit our SimpleSet Online tool at www.simpleset.com
www.simpleset.com
Set up the remote to control your devices
Direct Code Set - Set up the remote to control your devices Auto Search - Set up the remote to control your devices
Copy - Set up the remote to control your devices
2,5 - 5 cm
Top
Menu
Top
Menu
3
s
e
c.
3
s
e
c.
3
s
e
c.
Top
Menu
URC-7990-7991_mathijs UK_7990 - 7991 10-01-13 11:16 Pagina 5
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 7990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 7990 in the language / languages: All languages as an attachment in your email.

The manual is 24,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info