122513
33
Zoom out
Zoom in
Previous page
1/40
Next page
Shifted Learning
You can also learn a function on a key of the ONE FOR ALL
without sacrificing the original ONE FOR ALL function. The
"custom keys" are an ideal location for this. A Shifted
Learning function can also be put on any key EXCEPT the
following: Device keys, Magic key, Number keys.
To install a Shifted Learning function, simply follow steps 1-8
on the previous page. During step 5, press MAGIC one time
before you press the key for where you are placing the
learned function.
To access the shifted function, press Magic and then the key
you have learned on.
To delete a learned feature:
It is possible to delete all learned features or only individual
learned features.
To delete individual learned functions, follow the steps as
outline below.
1. Press and hold MAGIC until the device key blinks twice
(will blink once then twice).
2. Press 976 (the device key will blink twice).
3. Press the device key in which the function will be deleted.
4. Press twice on the learned key which will be deleted
(the device key will blink twice).*
5. If there is another key which you wish to delete, repeat
steps 2-4.
6. The original functions of the ONE FOR ALL 6 will now be
present.
* To delete a Shifted Learned feature, press MAGIC before you
press the learned key to be deleted (during step 4).
To delete all learned functions across all modes:
1. Press and hold MAGIC until the device key blinks twice
(will blink once then twice).
2. Press 980 (the device key will blink four times).
Notes:
-
During steps 2-8, you have approximately 10 seconds to conduct each
step. If there is a gap of more than 10 seconds between two steps, you
will have to start over at step number 2.
-
If you learn a function on another key besides the "custom keys", the
original ONE FOR ALL feature automatically becomes shifted. You can
press MAGIC then the key to access it (this excludes the Power, Mute,
Channel and Volume keys).
-
The Learning feature is mode specific. Therefore you can place one
learned feature per mode on the same key.
-
If a Shifted Learned function is placed on the Mute, Channel and Volume
keys then Scan and Colour/Brightness will be sacrificed.
-
The ONE FOR ALL 6 can learn approximately 25 functions.
-
You can replace a learned function by placing another learned function
on top.
-
Learning should not be done in direct sunlight or under incandescent lights.
-
Make sure you are using new batteries before following the instructions
above.
-
Upon changing the batteries, your learned functions will be retained.
WWW.ONEFORALL.COM 31
Advanced Features
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 7560 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 7560 6 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info