122377

One for All urc 7540 4 Manual

9
Zoom out
Zoom in
Previous page
1/34
Next page
Direct Set-Up
Setting Up Your Devices
To set up the ONE FOR ALL 4 for your TV, VCR, Satellite and
Cable Box, follow the instructions below.
To set up your TV:
Find your Television code in the
Set-Up Code section (starting on page
11). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on.
Press and release your ONE FOR ALL 4’s
TV key, then press and hold down the
MAGIC key until the red light blinks
twice (the light will blink once then
twice).
Enter your four-digit TV code using the
number keys. The red light will blink
twice.
Now, aim the ONE FOR ALL 4 at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL 4 should be ready to run your
Television.
Turn your device back on and try all the
remote’s functions to ensure they are
working properly. If the functions do not
work properly, repeat steps 1-5 using
another code listed under your brand.
Write your code in the four boxes provided in the battery
compartment and on page 10 for easy future reference.
7
ONE FOR ALL
Acura
Admiral
Adyson
Agazi
AGB
Agef
Aiko
0009
0087, 0093, 0363, 041
0217, 0216
0264
0516
0087
0216, 0009, 0037, 0
0037, 0274
0361, 0208, 0371,
1
2
4
5
3
Installation
Important notes:
- To set up your Video Recorder or Satellite, follow the same
instructions above, only press the VCR or SAT key during step 2.
- To set up your Cable Box, follow the instructions above only
press the SAT key during step 2.
- Some codes are quite similar. If your device does not respond or
is not functioning properly with one of the codes, try another
code listed under your brand.
- If your Television, Video or Satellite does not respond, follow
steps 1 through 5 with each code listed for your brand. If none
of the codes listed for your brand operate your device, try the
search method described on page 8, even if your brand is not
listed at all.
- If you change programmes on your Television through your
Video Recorder, press VCR and not TV, before you use the
programme keys.
- Remember, to control your device after the ONE FOR ALL is set
up, you must press the device key first (TV, VCR, SAT).
- Write the codes for your devices in the boxes provided on page
10 and in the battery compartment for easy future reference.
____
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All urc 7540 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All urc 7540 4 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info