WWW.ONEFORALL.COM 9
Colour, Brightness and Contrast
Depending on the functions of your original remote control, the ONE
FOR ALL may operate the colour, brightness and contrast settings of
your television.
Colour up = Press and release MAGIC then hold Volume (+)
Colour down = Press and release MAGIC then hold Volume (-)
Brightness up = Press and release MAGIC then hold Channel (+)
Brightness down = Press and release MAGIC then hold Channel (-)
Contrast up = Press and release MAGIC then hold Menu (up)
Contrast down = Press and release MAGIC then hold Menu (down)
Auto Scan
Your ONE FOR ALL comes with a special Scan function which lets you
scan through every channel available on your television.
To scan the channels on your TV:
1 Aim the ONE FOR ALL at your TV. Press and release MAGIC then
press the MUTE key.
The ONE FOR ALL will send the command to advance through all
the channels available on your television stopping at each channel
for about three seconds. Remember, you must aim the ONE FOR ALL
at your device the entire time you are using Scan.
2 When you find a channel you would like to watch, simply press any
key.
Sleeptimer
If your television has a “Sleeptimer” function built in, you can access
this function with your ONE FOR ALL remote. To do so:
1 Make sure your television is switched on (not in standby).
2 Point the ONE FOR ALL at your television and press and release
MAGIC then press POWER. You should see the Sleeptimer activate
on your TV screen.
3 To increase the timer, simply press MAGIC then POWER again until
the timer gets to the desired time.
To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3,
continue pressing MAGIC and POWER until the timer indicates zero
minutes.
Advanced Features
Note: Depending on how you used sleeptimer on the original remote, you
might need to access sleeptimer in a different way (through menu
for example).
Note: You have 5 seconds to press the Volume, Channel or Menu keys after
pressing MAGIC.
Note: Auto Scan may not work with devices that not have Channel +/- keys
on the original remote control.