Manual One for All URC 6800 (page 8 of 17) (English)

492806

Zoom out

Zoom in

1/17

Web Site : http://www.oneforall.com Web Site : http://www.oneforall.com

TV/VCR Combo.

NOTE: If you have tried all the codes listed for your

brand and your TV/VCR Combo does not respond,

try using the search method found on page 21.

5. Your Cinema 6+ is now programmed to operate your

TV/VCR Combo. Write your TV/VCR Combo code in

the boxes to the left for future reference.

Remember, to use your Cinema 6+ to operate your TV/VCR

Combo, press the VCR key first.

Setup Codes For TV/VCR Combos

American High 0035*

Brocksonic 0002, 0294, 0479

Colt 0072

Curtis Mathes 0035*

Daewoo 0278*

Emerson 0002, 0294, 0479

Funai 0000

GE 0035*, 0060*, 0048*, 0240

Hitachi 0035*, 0000

HQ 0000

Lloyds 0000

Magnavox 0000, 0035*, 0081*

Magnin 0240

Memorex 0037, 0162*

MGA 0240

Mitsubishi 0048*

Orion 0002, 0294, 0479

Panasonic 0035*, 0162*

Penney’s 0035*, 0240, 0162*

Quasar 0035*, 0162*

RCA 0035*, 0060*, 0048*

Sansui 0000, 0479

Sanyo 0240

Sears 0000, 0037

Sony 0032*

Symphonic 0000

Zenith 0000

NOTE: If your TV/VCR works with one of the above codes highlight-

ed with an asterisk (*), you may need to program a separate TV

code to control the volume. Check the list of codes below and follow

the instructions in the “Programming the Cinema 6+ to Operate

Your TV” section to program the supplied TV code.

TV/VCRs working on VCR code 0032 may require

TV code 0000 for volume control.

TV/VCRs working on VCR code 0035 may require

TV code 0051 for volume control.

TV/VCRs working on VCR code 0048 may require

TV code 0093 for volume control.

TV/VCRs working on VCR code 0060 may require

TV code 0047 for volume control.

TV/VCRs working on VCR code 0081 may require

TV code 0054 for volume control.

TV/VCRs working on VCR code 0162 may require

TV code 0250 for volume control.

TV/VCRs working on VCR code 0278 may require

TV code 0451 for volume control.

Programming the Cinema 6+ to operate your DVD or

Laser Disc Player:

Locate the brand name of your DVD or Laser Disc Player in

the DVD or Laser Disc Player setup codes (starting on the

next page), and write it in the space below.

DVD/LD Player Brand: ______________________

The brands are listed in alphabetical order with the most pop-

ular codes listed first.You will use one of these codes to pro-

gram your Cinema 6+ to operate your DVD or Laser Disc

Player as follows:

1. Turn on your DVD or Laser Disc Player and insert a

disc.

2. Press DVD/LD and release. Press and hold

SETUP until the Cinema 6+’s red light blinks twice,

then release SETUP.

3. Enter the first four-digit DVD or Laser Disc Player

code listed for your brand. If performed correctly, the

red light will blink twice when entering the final digit.

4. Aim the Cinema 6+ at your DVD or Laser

Disc Player and press POWER. Your

DVD or Laser Disc Player should turn off. If it does

not respond, repeat steps 2-4, trying each code list-

ed for your brand until you find the one that works.

NOTE: If you have tried all the codes listed for your

brand and your DVD or Laser Disc Player does not

respond, try using the search method found on page

21.

5. Your Cinema 6+ is now programmed to operate your

DVD or Laser Disc Player. Write your DVD or Laser

Disc Player code in the boxes to the left for future refer-

ence.

Remember, to use Cinema 6+ to operate your DVD or Laser

Disc Player, press the DVD/LD key first.

Setup Codes for DVD Players

JVC 0558

Kenwood 0534

Magnavox 0503

Mitsubishi 0521

Onkyo 0503

Panasonic 0490

Philips 0539, 0503

Pioneer 0525, 0571

Proscan 0522

RCA 0522

Samsung 0573

Sony 0533

Technics 0490

Toshiba 0503

Yamaha 0490, 0545

Zenith 0503, 0591

Setup Codes for Laser Disc Players

Denon 0059

Mitsubishi 0059

NAD 0059

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 6800 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC 6800 Manual

Product: