Manual One for All URC-6692 (page 22 of 72) (English)

492798

Zoom out

Zoom in

1/72

OFA Kameleon™ 6-Device Hybrid Remote

20 Troubleshooting

PROBLEM: N

o display when programming

SOLUTION: Display has turned off due to

inactivity. Start programming

again and do not pause while

performing instructions.

PROBLEM: During programming, the two

inner IR segments display a

long flash.

SOLUTION: An invalid entry has occurred.

Check the keys to be pressed

and start programming again.

PROBLEM: IR sent animation is displayed

when you press a key, but

home entertainment device

does not respond.

SOLUTION: Make sure the remote control

is aimed at your home

entertainment device and is

not farther than15 feet away.

PROBLEM: The unit does not control

home entertainment devices

or commands are not working

properly.

SOLUTION: Try all listed codes for the

device brands being set up.

Make sure they can be

operated with an infrared

remote control.

PROBLEM: Tried Searching For Your

Code method and still could

not find a working code.

SOLUTION: Perform Restoring Factory

Default Settings on page 17.

Then repeat Searching For

Your Code on page 10.

PROBLEM: Cannot program a macro onto

M1, POWER or other keys.

SOLUTION: Make sure the total number of

key presses being

programmed is less than 15

and that you are not trying to

program a macro on an

invalid key (Device keys, Set

Key and Fav key).

PROBLEM: Power macro does not

execute.

SOLUTION: Make sure to press and hold

the POWER for at least three

seconds to initiate Power

Macro.

PROBLEM: Changing channels does not

work properly.

SOLUTION: If original remote control

required pressing ENTER or OK

to change channels, press

ENTER or OK on the remote

control after entering the

channel number.

PROBLEM: During learning, Inner IR

Segments display a long blink

after pressing and holding key

to be learned.

SOLUTION: Memory is full or a bad

capture has occurred. Avoid

high-ambient light sources,

such as direct daylight and

fluorescent bulbs. Try

readjusting positions of

remote controls before

performing the procedure

again.

PROBLEM: Tried Search For Your Code

method and still could not

find a working code.

SOLUTION: Clear the device key as

follows:

1. Press and hold SET until

the Inner IR Segments

blink twice, then release.

2. Enter 9 9 2.

3. Press the device key to be

cleared twice.

4. Repeat the Search For

Your Co de m e t ho d .

OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 20 Monday, April 11, 2005 12:45 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-6692 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-6692 Manual

Product: