492798

One for All URC-6692 Manual

16
Zoom out
Zoom in
Previous page
1/72
Next page
OFA Kameleon™ 6-Device Hybrid Remote
14 Re-Assigning Device Keys
PROGRAMMING A LEARNING KEY
1. Press and hold SET until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2. Enter 9 7 5. The Inner IR Segments
will blink twice.
3. Press a device key once (e.g., TV) to
assign a mode for learning.
4. Press the desired key once (e.g., +100
Key) to store a feature to be learned.
The unit will display the learning
animation of the IR segments and will
then turn off the screen
5. Place your original remote control
(e.g., TV remote control) head-to-head
(about 2" apart) from the OFA
Kameleon™ 6-Device Hybrid Remote
(URC-6692).
6. On your original remote control, press
and hold the key (i.e., feature) to be
learned until the display on the OFA
Kameleon™ 6-Device Hybrid Remote
(URC-6692) turns on and the Inner IR
segments blink twice. If the Inner IR
segments does not blink twice (shows
a long blink), repeat steps 3 through 6.
7. To learn functions onto other learning
keys (e.g., M1, PG+, PG-, etc.), repeat
steps 3 through 6.
8. To lock in new feature(s) on the OFA
Kameleon™ 6-Device Hybrid Remote
(URC-6692), press and hold SET until
the Inner IR segments blink twice,
then release SET.
9. To test a learned feature, press a device
key (e.g., TV) once where the learning
mode was assigned. Then press the
learning key (e.g., +100) where the
learned feature is stored.
DELETING FUNCTIONS FROM THE LEARNING
KEYS:
1. Press and hold SET until the two Inner
IR segments flash twice. The current
mode key will blink on and off during
programming.
2. Enter 9 7 6. The Inner IR Segments
will blink twice.
3. Press the device key once where the
learned feature is stored (e.g., TV).
4. Press the learning key (e.g., +100) to
be deleted twice. The Inner IR
Segments will blink twice after the
second press.
5. To clear additional functions stored on
other learning keys, repeat steps 1
through 4 (in this section).
RE-ASSIGNING DEVICE
KEYS
The OFA Kameleon™ 6-Device Hybrid
Remote (URC-6692) can be set to control a
second TV, VCR, DVD player, or other
device. For example, to control a TV, a cable
box, and two DVDS, you will need to re-
assign the unused AUX key to operate the
second DVD as follows:
1. On the remote control, press and hold
SET until the two Inner IR segments
flash twice. The current mode key will
blink on and off during programming.
2. Enter 9 9 2. The Inner IR Segments
will blink twice.
3. Press DVD once, then press AUX once.
2"
OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 14 Monday, April 11, 2005 12:45 PM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC-6692 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-6692 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info