Manual One for All URC-6692 (page 12 of 72) (English)

492798

Zoom out

Zoom in

1/72

OFA Kameleon™ 6-Device Hybrid Remote

10 Searching For Your Code

5. Aim the remote control at the device

and press POWER once (or PLAY). It

should turn off (or begin playing). If

the device does not respond, repeat

steps 2 through 5, trying each code for

your brand until you find one that

works. If it still does not work, try

Searching For Your Code.

SEARCHING FOR YOUR

CODE

If your device does not respond to the

remote control after trying all codes listed

for your brand, or if your brand is not listed

at all, try searching for your code.

For example, to search for a code for your

TV:

1. Turn on your TV and on the remote

control, press TV once.

2. Press and hold SET until the two Inner

IR segments flash twice. The current

mode key will blink on and off during

programming.

3. Enter 9 9 1. The Inner IR Segments

will blink twice.

4. Select a test function from the list

below or use the default test function

(Power) and skip step 4

NOTE: Use any of the following keys for the

test function: 0, 1, 2, 3, Power, Volume Up,

Play, Stop or Mute.

5. Press the ^ (Arrow Up) key to begin

searching for your code. Stop the

search when the device turns off or

performs the function selected in step

4 (if other than Power).

NOTE: In the search mode, the remote

control will send IR codes from its library to

the selected device, starting with the most

popular code first. Every press of the ^

(Arrow Up) key will send a new code. If you

go past the code that performed the Test

Function (selected in step 4), you can go

back by pressing the v (Arrow Down) key.

6. To lock in the code, press and release

the SET key. The Inner IR Segments

blinks twice.

7. To search for the codes of your other

devices, repeat steps 1 through 6, but

substitute the appropriate device key

for the device you are searching for, in

step 1.

CHECKING THE CODES

If you have set up the remote control using

the Searching For Your Code procedure,

you may need to find out which four-digit

code is operating your equipment. For

example, to find out which code is operating

your TV:

1. On the remote control, press TV once.

2. Press and hold SET until the two Inner

IR segments flash twice. The current

mode key will blink on and off during

programming.

3. Enter 9 9 0. The Inner IR Segments

will blink twice.

4. To view the code for the first digit,

press 1 once. Wait 3 seconds, count the

section blinks (e.g., three blinks = 3)

and write down the number.

NOTE: If a code digit is “0”, the segments

will not blink.

5. Repeat step 4 three more times for

remaining digits. Use 2 for the second

digit, 3 for the third digit, and 4 for the

fourth digit.

OFA Kam 6 Hybrid Owners Manual Fr-Eng.fm Page 10 Monday, April 11, 2005 12:45 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC-6692 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One for All URC-6692 Manual

Product: