Search Method
WWW.ONEFORALL.COM 13
Important notes:
- When you want to control your device, press
the device key first (TUN, CD, TAPE, or MD).
- To search for the code for your CD Player or
Audio Cassette Player, follow the same
instructions above, only press the CD or TAPE
key during step 2 and alternate between CD or
TAPE and the PLAY key while performing the
search.
- During step 5, you may have to press these
keys many times (up to 150!), so be patient.
Remember, you must aim the AUDIO ZAPPER
at your device the entire time you are
searching for your code.
After
you have used the Search Method, you can
find out which code the AUDIO ZAPPER responded
to by blinking back the code. It's handy to know
your Amplifier/Tuner, CD Player, MD Player, and
Audio Cassette codes for future reference.
Remember, you can only blink back your code after
the AUDIO ZAPPER is operating your device.
To blink out your TUN code:
Press the TUN key on the AUDIO
ZAPPER.
Then, press and hold the MAGIC
key until the LED blinks twice (the
LED will blink once then twice).
Next, press Programme-,
Programme-, Programme+.
For the first digit of your 6-digit
code, press Volume+ and count
all the red blinks.
For the second digit, press
Volume - and count all the red
blinks.
1
