WWW.ONEFORALL.COM 9
Code Blink Out
After you have used the Search Method, you can find out which code the
ZAPPER responded to by blinking back the code. It’s handy to know your
Television, Satellite Receiver or Cable Converter code for future reference.
Remember, you can only blink back your code after the ZAPPER is
operating your device.
To blink out your TV code:
1 Press the TV key on the ZAPPER.
2 Then, press and hold the MAGIC key until the POWER
(LED) key blinks twice (it will blink once then twice).
3 Next, press Programme(-), Programme(-),
Programme(+).
4 For the first digit of your 5-digit code, press Volume + ( )
and count the red blinks.
5 For the second digit, press Volume - ( ) and count the
red blinks.
6 For the third digit, press Programme(+) and count the
red blinks.
7 For the fourth digit, press Programme(-) and count the
red blinks.
8 For the fifth digit, press MUTE and count the red blinks.
Write the codes for your TV and SAT in the boxes provided on page 7 and
inside the battery compartment for easy future reference.
Important note: To blink out the code for your Satellite Receiver or
Cable Converter, follow the same instructions above, only press the SAT
key during step 1.
