492811
11
Zoom out
Zoom in
Previous page
1/23
Next page
11
PROGRAMMING A MASTER POWER MACRO
(continued)
Clearing The Master Power Macro
1. Press and hold SET until the LED (red light) blinks twice,
then release
SET.
2. Enter
9 - 9 - 5. The LED will blink twice.Then press POWER
once.
3. Press and hold
SET until the LED blinks twice,then release
SET.The Master Power Macro is now cleared.
RE-ASSIGNING DEVICE KEYS
The One ForAll 4 Device Universal Remote Control can be set to control a
second PVR,VCR,or DVD player.For example,to control a TV,a cable box,
and
two DVD players,re-assign the unused VCR/PVR key to operate the second
DVD player as follows:
1. On the remote control,press and hold
SET until the LED
(red light) blinks twice,then release SET.
2. Enter
9 - 9 - 2. The LED will blink twice.
3. Press
DVD once.
4. Press
VCR/PVR once. The LED will blink twice.The VCR/PVR
key is now ready to be set up to control your second DVD
player.See
Programming Device Control on page 8.
To re-assign a secondVCR or PVR (or DVR) to the unused
DVD key,repeat
steps 1 through 4.However, in step 3 substitute VCR/PVR for DVD,and in step 4
substitute
DVD for VCR/PVR.Now the DVD key will be ready to be set up as your
secondVCR or PVR (or DVR).See
Programming Device Control on page 8.
NOTE: Only one device can be assigned to an unused device key at a time.
USING CHANNEL SCAN
In the CBL/SAT or TV mode, use the FAV key to start a 3-second scan of all
channels.Or, if programmed,use the FAV key to scan only your favorite
channels to view a desired channel (see
Programming Favorite Channel Scan
on next page.)
1. Press
CBL/SAT or TV once.
URC4021 manual new IC:CTGAE4P 4021 manual booklet New IC 4/13/09 3:38 PM Page 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All URC 4021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All URC 4021 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info