Setting Up Your Device
To set up the ONE FOR ALL Lite for your Device:
Find your Television code in the
Set-Up Code section (starting on page
20). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on.
Press and release your ONE FOR ALL
Lite's TV key, then press and hold
down the MAGIC key until the red
light blinks twice (the light will blink
once then twice).
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
Now, aim your ONE FOR ALL Lite at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL Lite is ready to run your Television.
Write your code in the three boxes on page 19, for quick, easy
reference.
To control your Television, press TV first.
8
Setting Up The Lite
1
2
4
3
Important notes:
- To set up your Video Recorder or Satellite, follow the
same instructions above, only press the VCR or SAT key
during step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.
- If your Television, Video or Satellite does not respond,
follow steps 1 through 4 with each code listed for your
brand. If none of the codes listed for your brand operate
your device, then try the search method described on
page 15, even if your brand is not listed at all.
- If you change programmes on your Television through
your Video Recorder, press VCR and not TV, before you use
the programme keys.
- If your Video’s original remote control does not have a
POWER key, press PLAY instead of POWER when searching
for your code.
