585198

One for All SV 2020 Manual

4
Zoom out
Zoom in
Previous page
1/50
Next page
1
. Connect the first adapter to your router/modem;
2. Connect the second adapter to your Internet-enabled TV / Set-Top-Box / Game Console /
Media Player / Blu-ray Player etc.
Y
our ONE FOR ALL Internet to TV adapters are now READY to use.
Installation
6
E
ng
lis
h
OFF :
SLOW blinking :
FAST blinking :
OFF :
ON :
BLINKING :
ON :
FAST BLINKING (0.06 s ON/ 0.06 s OFF) :
NORMAL BLINKING (0.2 s ON/ 0.2 s OFF) :
SLOW BLINKING (1 s ON/ 1 s OFF) :
OFF :
SV-2010 = Press and hold for
12 seconds :
SV-2020 = auto-standby :
Reset to factory default :
-> POWER OFF
-> Adapter is in standby.
-> Adapter is doing security key exchange.
This could take up to 2 minutes.
-> No network connection detected.
-> Network connection detected, but no
network traffic.
-> Network traffic detected.
-> Powerline Link detected but no Powerline
traffic.
-> Powerline data rate higher than 60Mbps.
-> Powerline data rate between10Mbps to
60Mbps.
-> Powerline data rate slower than 10Mbps.
-> No Powerline Link detected.
-> Enter standby mode. Press and hold for 1
second to exit standby mode.
-> Will enter standby mode automatically if
ethernet is disconnected for 2 minutes.
Awakes automatically if there are network
activities.
-> Press and hold for 1 second.
Usage
ENHANCED SECURITY
Following these steps below will create enhanced security for your ONE FOR ALL Internet
to TV adapters;
1. Press and hold the Security button on the first adapter for 5-8 seconds and then release.
All LEDs will simultaneously turn off and on once;
2. Press and hold the Security button on the second adapter for 5-8 seconds and then release.
All LEDs will simultaneously turn off and in once;
3. Press Security button on first adapter for 1-3 seconds. The power LED will start blinking;
4. Within 2 minutes press Security button on second adapter for 1-3 seconds. The power LED
will start blinking;
708774_SV-2010-2020_RDN-1100512_INT.PAG:SV-2010_SV-2020 10-05-12 11:45 Pagina 6
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All SV 2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All SV 2020 in the language / languages: All languages as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info