585203

One for All SV 1715 - Wireless TV Sender Manual

6
Zoom out
Zoom in
Previous page
1/110
Next page
6
Make sure that both the TRANSMITTER and RECEIVER
are switched off.
Put both "RECEIVER" and "TRANSMITTER" on the same
channel by using the slide switch on the back side of the units
Connecting the TRANSMITTER unit
Use the AV cable labeled “TRANSMITTER” to Connect the
TRANSMITTER UNIT to the source devic (e.g. VCR). Make sure that
the SCART is connected to the correct Output of the device,
normally called “Line Out”.
If you wish to remotely control the source device (satellite receiver, video
recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV
decoder box) from another room, for example to change channels on your
satellite receiver, you will need to:
Place the TRANSMITTER next/close to the source device and connect
the IR eye to the TRANSMITTER. Place the IR eye directly on the IR
receiver window on the front-side of the source device OR place the
IR eye in front of the source device (make sure there is no interfe-
rence of the IR Eye signal going to the IR receiver of
the source device).
Now, insert the adapter plug into the connector on the backside.
Connecting the RECEIVER unit
Use the AV cable labeled “RECEIVER” to Connect the
RECEIVER UNIT to the destination devic (e.g. TV). Make sure that
the SCART is connected to the correct Input of the device,
normally called “Line In”.
Insert the adapter plug into the connector on the backside.
If you want to control the source device, place the RECEIVER on top or
beside the destination device where it is able to catch the IR command
from your remote control.
Now that both units are connected you can switch ON the units
using the ON/OFF switch. The red LED on the front should light up.
Place the units as high as possible to avoid interference of any kind.
Installation
See page 3 (fold-out page)
1
2
3
4
5
SV_1715_AV_Sender 17 talen:SV_1715_AV_Sender 17 talen 25-05-2007 09:18 Pagina 6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One for All SV 1715 - Wireless TV Sender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One for All SV 1715 - Wireless TV Sender in the language / languages: All languages as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info