776559

One Concept 10038757 Manual

16
Zoom out
Zoom in
Previous page
1/56
Next page
16
EN
INSTALLATION LOCATIONS TO AVOID
1. Near equipment and/or areas where smoke/vapor regularly occurs
(kitchens, replace rooms, boiler rooms, and similar locations). Use special
smoke detectors for these areas.
2. Areas of high humidity, such as bathrooms or laundry rooms. At least 3 m
away from these areas.
3. Near vents and vents for heating and cooling. At least 1 m away from these
areas. The air could blow smoke away from the smoke detector and stop
an alarm or even cause a false alarm.
4. In rooms where the temperature could drop below 5 °C or rise above
40°C.
5. In dusty or dirty areas, particles will interfere with the operation of the
smoke detector. False alarm could be triggered.
6. Installation (screwing) on plaster containing asbestos may only be carried
out using low-emission processes
INSTALLATION
Note: The bracket or device will not close without the battery being
properly installed. This is a legal requirement and is for your safety.
1. Remove the bracket from the alarm body.
2. Hold the bracket in the installation position and mark the bracket
installation holes with a pencil.
3. Drill two holes for the dowels.
4. Attach the bracket to the dowels and tighten the screws (see installation
diagram).
5. Attach the alarm to the bracket and turn the alarm body clockwise until it
locks into the bracket.
6. Press the test button for at least 5 seconds to test the device. The
alarm will sound: 3 beeps - 1.5 second pause. If no sound is heard, this
indicates a faulty alarm. You may nd a solution in this manual under
„Troubleshooting.
7. If you have further questions about the installation, contact your dealer.
Note: To avoid injury, this unit must be securely fastened to the ceiling
according to the installation instructions.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for One Concept 10038757 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of One Concept 10038757 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info