Manual One Concept 10038748 (page 18 of 56) (English, German, French, Italian, Spanish)

776553

Zoom out

Zoom in

1/56

FUNCTION TEST AND OPERATING MODES

Test Device

Test your device by pressing and holding the test button for min. 5 sec. This

will sound an alarm if the electronic circuitry, siren and battery are working. If

no alarm sounds, the unit or batteries may be defective. DO NOT use an open

ame to test your alarm, this may damage the unit. We recommend that you

test the unit weekly.

Standby Mode

The red LED on the front panel should ash every 32 seconds to indicate that

the alarm is active.

Alarm Mode

As soon as the unit detects smoke particles, the siren will sound and the red

LED will ash one ash per second. The ashing LED and alarm will remain

until the air is free of smoke particles. The unit will then go back into standby

mode.

Battery Warning Mode

If your smoke detector enters a low battery condition, the unit will emit an

audible chirp every 32 seconds. In this case, you must replace the battery

immediately. If you do not replace the battery, your smoke detector may not

have enough power to warn you in a real re situation.

Error Mode

The alarm tone or a chirp sounds every 32 seconds for no apparent reason (see

„Troubleshooting“).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One Concept 10038748 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One Concept 10038748 Manual

Product: