Manual One Concept 10032948 Clean Turbo (page 13 of 36) (English, German, French, Italian, Spanish)

776469

Zoom out

Zoom in

1/36

START-UP AND OPERATION

Before the rst Use

• Take the appliance and accessories out of the box. Remove the sckers,

protecve foil or plasc from the device.

• Only use the device if all the lters included the dust compartment

are placed properly, a damaged or improperly installed lter or dust

compartment may damage the unit.

Use

• Choose the desired brush: the combi nozzle for narrow surfaces or the

tube together with the oorbrush.

• Insert the plug into the power socket. Make sure that the power supply

corresponds to the required power menoned on the rang label.

• Press the on/o buon to turn on the power.

CLEANING AND MAINTENANCE

Emptying the Dust Container

• Hold the dust container above an open dustbin.

• Use the dump buon to open the boom plate of the dust container, the

dust container will open and the dirt will fall out.

Cleaning the Filter

• Take out the dust container by pushing the dust container release buon.

• Turn the lid of the dust container anclockwise and remove it.

• Carefully remove the cyclone lter from the dust container.

• Remove the foam lter holder from the cyclone lter.

• Remove the foam lter from the lter holder. Please note: the thin fabric

lter is rmly aached to the lter holder and cannot be taken out of the

holder!

• Thoroughly rinse all the parts with clear, lukewarm water. Do not use any

cleaning agent.

• Shake o any excess water and allow all the parts to dry completely

before reinserng them.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of One Concept 10032948 Clean Turbo in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

One Concept 10032948 Clean Turbo Manual

Product: