504943
7
Zoom out
Zoom in
Previous page
1/12
Next page
English
6
R5-I
If a measuring error has occurred, this is indicated by or .Please refer to
the instructions.
When you press the ON/OFF (O/I) but-
ton, all the symbols on the display
light
up briefly. This serves to check the dis-
play. Then all the symbols go out and
the air release symbol
( ) begins to
flash. When the symbol (
)
appears,
the monitor is ready and begins the
measurement.
SYS
mmHg
DIA
mmHg
PULSE/min
Your blood pressure is measured during
inflation, so it is important not to move.
Sit still and do not move your wrist! Do
not talk! Do not touch the monitor while
it is measuring.
The monitor inflates the cuff and the
measurement is taken within approx.
30 seconds.
Once the arrow appears in the display the
measurement is finished and deflation of
the cuff takes place.
After this the systolic and diastolic blood
pressure is shown, alternating with the
pulse reading. This reading will be stored
in the memory.
Display of pulse rate
Alternating
display
Display of measurement results
Measurement of blood pressure is now complete. Press the O/I button to
turn power off.
Should you forget to turn off the power, it will turn itself off automatically after
2 minutes. The previous reading will remain in the memory even if the batteries
run down or are replaced.
E
E
E
I
If you wish to repeat the measurement, you should remove the cuff for at least
3 minutes because if you take the next measurement immediately, a slight blood
congestion may occur wich can lead to incorrect measurements or an error
message.
Keep a record of your measurements. In this way both you and your doctor will
have an accurate overview of your blood pressure situation.
Wrist blood pressure is measured at the different region from the usual brachial
blood pressure measurement and may show slightly different value. In many
cases, the difference between the wrist and the brachial blood pressures can be
up to –10 mmHg both for the systolic and the diastolic pressures for the healthy
people.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omron R5 I - HEM-630-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omron R5 I - HEM-630-E in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info