704052

Omron M4 Intelli IT - HEM-7155T-EBK Manual

2
Zoom out
Zoom in
Previous page
1/20
Next page
EN1
EN
1. Introduction
Thank you for purchasing the OMRON Automatic Upper Arm Blood
Pressure Monitor. This blood pressure monitor uses the oscillometric
method of blood pressure measurement. This means this monitor
detects your blood movement through your brachial artery and
converts the movements into a digital reading.
1.1 Safety Instructions
This instruction manual provides you with important information
about the OMRON Automatic Upper Arm Blood Pressure Monitor.
To ensure the safe and proper use of this monitor, READ and
UNDERSTAND all of the safety and operating instructions. If you do
not understand these instructions or have any questions, contact
your OMRON retail outlet or distributor before attempting to
use this monitor. For specific information about your own blood
pressure, consult with your physician.
1.2 Intended Use
This device is a digital monitor intended for use in measuring blood
pressure and pulse rate in adult patient population. The device detects
the appearance of irregular heartbeats during measurement and
gives a warning signal with readings. It is mainly designed for general
household use.
1.3 Receiving and Inspection
Remove this monitor from the packaging and inspect for damage. If
this monitor is damaged, DO NOT USE and consult with your OMRON
retail outlet or distributor.
2. Important Safety Information
Read the Important Safety Information in this instruction manual
before using this monitor. Follow this instruction manual thoroughly
for your safety.
Keep for future reference. For specific information about your own
blood pressure, CONSULT WITH YOUR PHYSICIAN.
2.1 Warning
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
• DO NOT use this monitor on infants, toddlers, children or persons
who cannot express themselves.
• DO NOT adjust medication based on readings from this blood
pressure monitor. Take medication as prescribed by your physician.
ONLY a physician is qualified to diagnose and treat high blood
pressure.
• DO NOT use this monitor on an injured arm or an arm under medical
treatment.
•
DO NO
T apply the arm cuff on your arm while on an intravenous
drip or blood transfusion.
• DO NOT use this monitor in areas containing high frequency (HF)
surgical equipment, magnetic resonance imaging (MRI) equipment,
computerized tomography (CT) scanners. This may result in incorrect
operation of the monitor and/or cause an inaccurate reading.
• DO NOT use this monitor in oxygen rich environments or near
flammable gas.
•
C
onsult with your physician before using this monitor if you have
common arrhythmias such as atrial or ventricular premature beats
or atrial fibrillation; arterial sclerosis; poor perfusion; diabetes;
pregnancy; pre-eclampsia or renal disease. NOTE that any of these
conditions in addition to patient motion, trembling, or shivering
may affect the measurement reading.
•
NE
VER diagnose or treat yourself based on your readings. ALWAYS
consult with your physician.
• To help avoid strangulation, keep the air tube and AC adapter cable
away from infants, toddlers and children.
• This product contains small parts that may cause a choking hazard if
swallowed by infants, toddlers and children.
Data Transmission
• This product emits radio frequencies (RF) in the 2.4GHz band.
DO NOT use this product in locations where RF is restricted, such as
on an aircraft or in hospitals. Turn off the Bluetooth® feature in this
monitor, remove batteries and/or unplug the AC adapter when in
RFrestricted areas.
EN3
• ONLY use the AC adapter, arm cuff, batteries and accessories
specified for this monitor. Use of unsupported AC adapters, arm
cuffs and batteries may damage and/or may be hazardous to this
monitor.
• ONLY use the approved arm cuff for this monitor. Use of other arm
cuffs may result in incorrect readings.
• Inflating to a higher pressure than necessary may result in bruising
of the arm where the cuff is applied. NOTE: refer to “If your systolic
pressure is more than 210mmHg” in section 13 of instruction
manual
for additional information.
• Read and follow the “Correct Disposal of This Product” in section 7
when disposing of the device and any used accessories or optional
parts.
Data Transmission
• DO NOT replace batteries or unplug the AC adapter while your
readings are being transferred to your smart device. This may result
in incorrect operation of this monitor and failure to transfer your
blood pressure data.
AC Adapter (optional accessory) Handling and Usage
• Fully insert the AC adapter into the outlet.
• When unplugging the AC adapter from the outlet, be sure to safely
pull from the AC adapter. DO NOT pull from the AC adapter cable.
• When handling the AC adapter cable:
Do not damage it. / Do not break it. / Do not tamper with it.
DO NOT pinch it. / Do not forcibly bend or pull it. / Do not twist it.
DO NOT use it if it is gathered in a bundle.
DO NOT place it under heavy objects.
• Wipe any dust off of the AC adapter.
• Unplug the AC adapter when not in use.
• Unplug the AC adapter before cleaning this monitor.
Battery Handling and Usage
• DO NOT insert batteries with their polarities incorrectly aligned.
• ONLY use 4 “AA” alkaline or manganese batteries with this monitor.
DO NOT use other types of batteries. DO NOT use new and used
batteries together. DO NOT use different brands of batteries
together.
• Remove batteries if this monitor will not be used for a long period of
time.
• If battery fluid should get in your eyes, immediately rinse with
plenty of clean water. Consult with your physician immediately.
• If battery fluid should get on your skin, wash your skin immediately
with plenty of clean, lukewarm water. If irritation, injury or pain
persists, consult with your physician.
• DO NOT use batteries after their expiration date.
• Periodically check batteries to ensure they are in good working
condition.
2.3 General Precautions
• When you take a measurement on the right arm, the air tube should
be at the side of your elbow. Be careful not to rest your arm on the
air tube.
• Blood pressure may differ between the right and left arm, and
may result in a different measurement value. Always use the same
arm for measurements. If the values between both arms differ
substantially, check with your physician on which arm to use for
your measurements.
Remember to have a record of your blood pressure and pulse
readings for your physician. A single measurement does not provide
an accurate indication of your true blood pressure.
Please use the Blood Pressure Diary to keep records of several
readings over a certain period of time. To download PDF files of the
diary, visit www.omron-healthcare.com.
EN4
EN
3. Error Messages and Troubleshooting
If any of the below problems occur during measurement, check to make sure that no other electrical device is within 30 cm. If the problem persists,
please refer to the table below.
Display/Problem Possible Cause Solution
appears or the arm
cuff does not inflate.
The [START/STOP] button was pressed
while the arm cuff is not applied.
Press the [START/STOP] button again to turn the monitor off.
After inserting the air plug securely and applying the arm cuff
correctly, press the [START/STOP] button.
Air plug is not completely plugged into
the monitor.
Insert the air plug securely.
The arm cuff is not applied correctly. Apply the arm cuff correctly, then take another measurement.
Refer to section 7 of instruction manual
.
Air is leaking from the arm cuff. Replace the arm cuff to the new one. Refer to section 14 of
instruction manual
.
appears or a
measurement
cannot be
completed after the
arm cuff inflates.
You move or talk during a measurement
and the arm cuff does not inflate
sufficiently.
Remain still and do not talk during a measurement. If “E2”
appears repeatedly, inflate the arm cuff manually until the
systolic pressure is 30 to 40 mmHg above your previous
readings. Refer to section 13 of instruction manual
.
Due to the systolic pressure is above
210mmHg, a measurement cannot be
taken.
appears
The arm cuff is inflated exceeding the
maximum allowable pressure.
Do not touch the arm cuff and/or bend the air tube while taking
a measurement. If inflating the arm cuff manually, refer to
section 13 of instruction manual
.
appears
You move or talk during a measurement.
Vibrations disrupt a measurement.
Remain still and do not talk during a measurement.
appears
The pulse rate is not detected correctly. Apply the arm cuff correctly, then take another measurement.
Refer to section 7 of instruction manual . Remain still and sit
correctly during a measurement.
If the “
” symbol continues to appear, we recommend you to
consult with your physician.
/ /
appears
does not flash during
a measurement.
EN5
Display/Problem Possible Cause Solution
appears
The monitor has malfunctioned. Press the [START/STOP] button again. If “Er” still appears, contact
your OMRON retail outlet or distributor.
appears
The monior cannot connect to a smart
device or transmit data correctly.
Follow the instructions shown in the “OMRON connect” app.
If the “Err” symbol still appears after checking the app, contact
your OMRON retail outlet or distributor.
flashes
The monitor is waiting for pairing with
the smart device.
Refer to section 5 of instruction manual
for pairing your
monitor with your smart device, or press [START/STOP] button
to cancel pairing and turn your monitor off.
flashes
The monitor is ready to transfer your
readings to the smart device.
Open the “OMRON connect” app to transfer your readings.
flashes
More than 48 readings are not
transferred.
Pair or transfer your readings to the “OMRON connect” app so
you can keep them in memory in the app, and this error symbol
disappears.
The date and time is not set.
appears
There are 60 readings in memory to be
transferred
flashes
Batteries are low. Replacing all 4 batteries with new ones is recommended. Refer
to section 4 of instruction manual
.
appears or the
monitor is turned
off unexpectedly
during a
measurement
Batteries are depleted. Immediately replace all 4 batteries with new ones. Refer to
section 4 of instruction manual
.
Nothing appears on the
display of the monitor.
Battery polarities are not properly
aligned.
Check the battery installation for proper placement. Refer to
section 4 of instruction manual
.
Readings appear too high or
too low.
Blood pressure varies constantly. Many factors including stress, time of day, and/or how you apply the arm
cuff, may affect your blood pressure. Review section 2 of instruction manual
.
EN6
EN
Display/Problem Possible Cause Solution
Any other communication
issue occurs.
Follow the instructions shown in the smart device, or visit the “Help” section in the “OMRON
connect" app for further help. If the problem still persists, contact your OMRON retail outlet or
distributor.
Any other problem occurs.
Press the [START/STOP] button to turn the monitor off, then press it again to take a measurement.
If the problem continues, remove all batteries and wait for 30 seconds. Then re-install batteries.
If the problem still persists, contact your OMRON retail outlet or distributor.
4. Limited Warranty
Thank you for buying an OMRON product. This product is constructed of high quality materials and great care has been taken in its manufacturing.
It is designed to give you every satisfaction, provided that it is properly operated and maintained as described in the instruction manual.
This product is warranted by OMRON for a period of 3 years after the date of purchase. The proper construction, workmanship and materials of
this product is warranted by OMRON. During this period of warranty OMRON will, without charge for labour or parts, repair or replace the defect
product or any defective parts.
The warranty does not cover any of the following:
A. Transport costs and risks of transport.
B. Costs for repairs and / or defects resulting from repairs done by unauthorised persons.
C. Periodic check-ups and maintenance.
D. Failure or wear of optional parts or other attachments other than the main device itself, unless explicitly warranted above.
E. Costs arising due to non-acceptance of a claim (those will be charged for).
F. Damages of any kind including personal caused accidentally or from misuse.
G. Calibration service is not included within the warranty.
H. Optional parts have a one (1) year warranty from date of purchase. Optional parts include, but are not limited to the following items: cuff and
cuff tube.
Should warranty service be required please apply to the dealer whom the product was purchased from or an authorised OMRON distributor. For
the address refer to the product packaging / literature or to your specialised retailer. If you have difficulties in finding OMRON customer services,
contact us for information:
www.omron-healthcare.com
Repair or replacement under the warranty does not give rise to any extension or renewal of the warranty period.
The warranty will be granted only if the complete product is returned together with the original invoice / cash ticket issued to the consumer by the
retailer.
EN8
EN
6. Specifications
Product description Automatic Upper Arm Blood Pressure Monitor
Product category Electronic Sphygmomanometers
Model (code) M4 Intelli IT (HEM-7155T-EBK)
X4 Smart (HEM-7155T-ESL)
Display LCD digital display
Cuff pressure range 0 to 299mmHg
Pulse measurement range
40 to 180 beats / min.
Blood pressure measurement range
SYS: 60 to 260mmHg / DIA: 40 to 215mmHg
Accuracy Pressure: ±3mmHg / Pulse: ±5% of display reading
Inflation Automatic by electric pump Deflation
Automatic pressure release valve
Measurement method Oscillometric method Transmission method Bluetooth
®
Low Energy
Wireless communication Frequency range: 2.4GHz (2400 - 2483.5MHz) / Modulation: GFSK
Effective radiated power: <20dBm
Operating mode Continuous operation
IP classification Monitor: IP20 / Optional AC adapter: IP21
Rating DC6 V 4.0W Applied part Type BF (arm cuff)
Power source
4 “AA” batteries 1.5V or optional AC adapter (INPUT AC 100 - 240V 50 - 60Hz 0.12 - 0.065A)
Battery life Approximately 1000 measurements (using new alkaline batteries)
Durable period (Service life) Monitor: 5 years / Cuff: 5 years / Optional AC adapter: 5 years
Operating conditions +10 to +40°C / 15 to 90% RH (non-condensing) / 800 to 1060hPa
Storage / Transport conditions -20 to +60°C / 10 to 90% RH (non-condensing)
Contents Monitor, arm cuff (HEM-FL31), 4 “AA” batteries, storage case, Instruction Manual
and
, setup instructions
Protection against electric shock Internally powered ME equipment (when using only batteries)
Class II ME equipment (optional AC adapter)
Weight Monitor: approximately 340g (not including batteries) / Arm cuff: approximately 163g
Dimensions (approximately value) Monitor: 105mm (W) × 85mm (H) × 152mm (L)
Arm cuff: 145mm × 532mm (air tube: 750mm)
Memory Stores up to 60 readings per user
EN10
EN
9. Guidance and Manufacturer’s Declaration
• This blood pressure monitor is designed according to the European Standard EN1060, Non-invasive sphygmomanometers Part 1: General
Requirements and Part 3: Supplementary requirements for electromechanical blood pressure measuring systems.
• Hereby, OMRON HEALTHCARE Co., Ltd., declares that the radio equipments type HEM-7155T-EBK and HEM-7155T-ESL are complied with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.omron-healthcare.com
• This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co., Ltd., Japan. The Core component for OMRON
blood pressure monitors, which is the Pressure Sensor, is produced in Japan.
• Please report to the manufacturer and the competent authority of the Member State in which you are established about any serious incident
that has occurred in relation to this device.
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omron M4 Intelli IT - HEM-7155T-EBK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omron M4 Intelli IT - HEM-7155T-EBK in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omron M4 Intelli IT - HEM-7155T-EBK

Omron M4 Intelli IT - HEM-7155T-EBK User Manual - German - 19 pages

Omron M4 Intelli IT - HEM-7155T-EBK User Manual - Dutch - 20 pages

Omron M4 Intelli IT - HEM-7155T-EBK User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info