504874
8
Zoom out
Zoom in
Previous page
1/18
Next page
8
2.How to use the device
2. How to use the device
2.1 How to insert batteries
1. Turn the Intensity Adjustment Dial/Power Switch to the
“OFF” position.
2. Open battery cover on the back of the
main unit.
3. Insert batteries according to the
polarities (+ and -) shown in the bat-
tery compartment.
4. Close the battery cover.
2.2 How to connect the electrode cord
1. Turn the Intensity Adjustment Dial/
Power Switch to the “ position.
2. Insert the Electrode Cord Plug into
the Electrode Cord Jack on the
main unit.
3. Connect the Electrode Cord to the
Long Life Pads.
Place the Pads on a flat surface
and securely connect the Elec-
trode Cord Plugs to the Pads.
* Although Electrode Cord Plugs
are provided in red and white,
either plug can be connected
with one of the Pads irrespec-
tive of color.
1.5V LR03
OOOOOO
SIZU'AAA'
1.5V LR03
OOOOOO
SIZU'AAA'
Standard for battery replacement
If you feel the massage stimulation is weak, the batter-
ies may be worn. Replace the batteries with new ones.
General advice from OMRON on the handling of batteries
The supplied batteries are for the trial use only and may
wear out in less than three months.
Replace the worn batteries with new ones immediately.
If you are not going to use the unit for more than three
months, remove the batteries.
If you leave the unit without using it for a long time when
the batteries are included inside, leakage from the batter-
ies may occur.
Do not use new and worn batteries together or different
types of batteries together.
Insert the batteries with the polarities (+ and –) in correct
alignment.
When handling the batteries, be sure to read the notes
on the batteries.
Dispose of the used batteries according to the applicable
local regulations.
When using the unit for the first time
Take out the Pads from the clear plastic bag.
* Do not peel off the clear film attached to the Pad at this
time.
General advice from OMRON on the handling of Electrode Cord
Avoid excessive bending and pulling of the Electrode
Cord.
Hold the Electrode Cord Plug when unplugging the Elec-
trode Cord from the Main Unit.
If the Electrode Cord is torn or has a problem, please
contact the store where you purchased the unit or at the
nearest OMRON dealer.
HV-F127 manual.book 8 ページ 2011年12月12日 月曜日 午前10時59分
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omron E2 Elite - HV-F127-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omron E2 Elite - HV-F127-E in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omron E2 Elite - HV-F127-E

Omron E2 Elite - HV-F127-E User Manual - German - 16 pages

Omron E2 Elite - HV-F127-E User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info