490496
30
Zoom out
Zoom in
Previous page
1/40
Next page
00040292.DOC, Version 1.0
30/40
If the MMP-1 is operated with mixing function the master signal of player mechanism 1 and 2 is fed to
the MIXED OUTPUT. Connect the output via an RCA cable to the line inputs of an amplifier or active
speaker. Make sure that the right/left occupation (plug color red/white) is the same at both devices.
When the mixing function is activated the input channels can be monitored via stereo headphones ahead
of the faders. Connect the headphones to the jack PHONES.
If the MMP-1 is operated without mixing function the output signals of the individual player mechanisms
are fed to the corresponding outputs. Connect the outputs via RCA cables to the line inputs of a mixer or
amplifier. Make sure that the right/left occupation (plug color red/white) is the same at the devices.
The player mechanisms of the MMP-1 can be started or set to pause via an external mixer with fader
start function. Use the supplied mini jack cables to connect each output CONTROL START to the
corresponding input on the mixer.
Please note that the fader start function only works with compatible mixers (e.g. MX-540, EX-840, EX-820,
CM-860). Mode of operation: The mixer has to be connected via a 3.5 mm jack with the MMP-1. For starting
the playback, the jack's positive pin (tip) is to be connected with the audio mass via a short impulse. For pausing the
playback, the jack's negative pin (sleeve) is to be connected with the audio mass via a short impulse. The mixer has to
be equipped with a switch, button or fader that will connect the tip with the audio mass of the MMP-1 for starting the
playback and the sleeve for pausing the playback when the respective channel is activated.
Connect the MMP-1 to the mains.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omnitronic MMP-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omnitronic MMP-1 in the language / languages: English, German as an attachment in your email.

The manual is 15,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info