Check the details below before contacting Technical Support for repair or service.
If you need information or if you have a problem, please contact the local Customer Care Center.
When applying for after sales service, check the manufacturer’s serial number or bar code.
THE APPLIANCE DOES NOT WORK.
Make sure the power cord is properly plugged in.
Check the hopper is assembled properly. If the hopper has not been properly locked in place, the appliance does not work for safety reason.
Check if the appliance has been assembled according to the manual in an ordinary manner.
See the assembly in the manual or consult with the local Customer Care Center for help.
THE HOPPER DOES NOT OPEN.
Are there lots of pulps left inside the bowl? Press [ON ] button to discharge internal pulp somehow.
Have you placed any foreign substances or solid object such as hard seeds?
Press the [Reverse/REV] button to make foreign substances come up again toward the feeding tube.
Do not attempt to open it by force or with too much pressure. Still it does not work following by the above process, contact the local
Customer Care Center.
IT STOPS DURING NORMAL OPERATION.
Have you put heavy loads of ingredient or thick/big ingredient?Read the manual Page 12 and follow Reverse/REV button guideline.
Still the problem has not been solved, contact the local Customer Care Center.
THERE ARE THE GATE MARKS (FORMING MARK) RESULTING FROM THE MOLDING PROCESS.
It is a normal part and there is no problem for use.
WHAT IS THE DIFFERENCE BETWEEN FINE STRAINER AND COARSE STRAINER?
Use fine strainer with ‘small holes’ if you want somewhat clear juice.
Use the coarse strainer with ‘bigger holes’ if you want more pulpy juice or thicker juice.
Regarding strainer selection for suitable ingredients, read the manual Page 3.
JUICE LEAKS OVER THE BASE.
Is Extraction packing properly inserted in?
Juice could leak when the extraction packing is not properly inserted in. Please push the extraction packing tight enough.
Juice is still leaking even though the extraction packing was inserted properly? Did you put heavy loads?
If an amount of input ingredient is too much compared to the size of pulp outlet, the packing may be slightly pushed out and juice may leak through the
gap. Do not process heavy loads at a time and squeeze little by little.
THE BOWL SHAKES WHEN SQUEEZING.
Slight shaking may be occurred due to motor movement.
Large or small movements occur depending on the pulp texture of ingredients (hard or tough).
It is normal when the screw is rotating. Please note that it is not malfunction.
Hard ingredients (e.g: carrots/potatoes/radishes/beetroots etc.) may shake the bowl more than soft and juicy ingredient.
TROUBLESHOOTING
22 l
HE_OMEGA_VRT400_V.01.indd 262013-01-17 오전 11:28:54
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Omega VRT402HDS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Omega VRT402HDS in the language / languages: English as an attachment in your email.
The manual is 8,18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
