466660
7
Zoom out
Zoom in
Previous page
1/24
Next page
14
15
English
Quartz chronograph
Operating instructions2
The time, hours, minutes and seconds functions are driven by a
primary motor using traditional quartz watch technology.
The chronograph functions are provided by a combination of quartz
and mechanical technology. The chronograph hand, driven by a sepa-
rate motor, makes 16 jumps per second. Its movement appears con-
tinuous and it can be read off the scale to within 1/10th of a second.
The reset function, like the minute and hour totaliser functions, is car-
ried out mechanically. The return to zero is instantaneous.
In order to reduce energy consumption to a minimum, the chronograph
automatically stops after more than 11 hours of operation.
The crown has 3 positions:
Watch functions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2. Correcting the date: pull the crown out to position 2, turn the
crown forwards until the required date is displayed, then push the
crown back to position 1.
NB: it is impossible to set the date between 8pm and 2am.
3. Time setting: pull the crown out to position 3. The seconds hand
will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with
a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop etc.
Timing to within 1/10th of a second up to 11 hours.
Pusher B: reset (after stopping).
Í
The hours, minutes, seconds and chronograph functions are driven
by 4 motors using conventional quartz technology.
The crown has 3 positions:
Watch functions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown guarantees the watch is water-
resistant.
2. Time zone correction or 30 minutes totaliser hand initiali-
sation.
3. Time setting: pull the crown out to position 3. The seconds hand
will stop. Turn the crown forwards or backwards. Synchronise
the seconds by pushing the crown into position 1 to coincide
with a given time signal; resetting the 1/10th of a second and
60 second totalisers.
Chronograph functions:
Allows the time to be read off to
1/10th of a second up to 30 min-
utes in the simple, addition or split
modes (reading split times, interme-
diate times).
Simple timing function (crown in position 1):
Pusher A: start – stop (read time)
Pusher B: reset
CALIBRE 5200
2 Operating instructions
Quartz chronograph
CALIBRE 1270 (fig. X)
Note: if the chronograph has stopped after 11 hours in order to
conserve energy, it cannot be reset without pressing pusher A
beforehand.
OMEGA_V12-I.indb Abs1:14-Abs1:15OMEGA_V12-I.indb Abs1:14-Abs1:15 28/12/09 18:30:2528/12/09 18:30:25
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 8501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 8501 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omega 8501

Omega 8501 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info