466659
14
Zoom out
Zoom in
Previous page
1/24
Next page
28 29
English
Self-winding split-seconds chronograph
Operating instructions2
Pusher B: reset (after a stop).
Note: the chronograph must always be stopped before the zero
resetting function is used. Never push the chronograph’s two pushers
(A and B) simultaneously (calibre 3612).
Chronograph functions with split-seconds:
The split-seconds function allows split times to be recorded whilst the
chronograph is running.
1. Start the chronograph by pressing pusher (A) (start).
2. To record a split time, press pusher (C). The split-seconds hand (D)
stops, indicating the split time, whilst the chronograph continues
running.
NB: the split time should be read immediately, since the chrono-
graph totalisers for hours (G), minutes (E) and seconds (F) continue
to measure the elapsed time.
For calibre 3600 only: whilst the chronograph is running, do not
leave the split-seconds hand (D) stopped any longer than is neces-
sary to read the split time, otherwise the functioning of the split-
seconds mechanism may be affected.
3. Press pusher (C) for the split-seconds hand to catch up with the
chronograph seconds hand (F).
4. To record a new split time, start from step 2 above.
5. Press pusher (A) to stop the chronograph.
6. Press pusher (B) to reset.
NB: the split-seconds hand (D) must have caught up with the chro-
nograph seconds hand (F) as explained in step 3 before the chrono-
graph mechanism is reset/zeroed.
Í
Í
Perpetual calendar
Operating instructions2
Í
CALIBRE 1680 (fig. V)
k
The particularity of the Gregorian calendar is that one day (29th
February) is added to the year every four years to compensate for the
length of the solar year, which is 365.242192 days, or almost 365 1/4
days. Such years are called leap years and their number (for example
1996) is divisible by 4.
As the compensation of one day every four years is too much, every
100 years (2100, 2200, …) the year is not a leap year, even though it
is divisible by four. However, even this is not totally sufficient, since it
leaves an error of one day every 400 years. Therefore, if the number
of the year is divisible by 400 it is a leap year, as was the case with
the year 2000. Because of this, the perpetual calendar of your watch
is set to function correctly until 2100.
Thermocompensation
This movement is 10 times more precise than a conventional quartz
movement thanks to an electronic module that compensates for the
effects of temperature on the movement’s operation.
The crown has 3 positions:
Watch functions:
1.1.
Neutral position 1, normal when the watch is worn: in this
position, the crown ensures that the watch is water-resistant.
1.2. Setting the hands, minutes and seconds:
Pull the crown out to position 3 when the second hand is at
12 o’clock. The seconds hand will stop. Turn the crown forwards
or backwards to set the minute hand. Push the crown back into
position 1 to coincide with a given time.
NB: To avoid inadvertently changing the date when setting
the time, it is important to always follow point 1.2 and then
point 1.3.
OMEGA_V12-I.indb Abs1:28-Abs1:29OMEGA_V12-I.indb Abs1:28-Abs1:29 28/12/09 18:30:3428/12/09 18:30:34
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 8500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 8500 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omega 8500

Omega 8500 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info