466689

Omega 3220 Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
32 33
English
Operating instructions2
Self-winding GMT & GMT Chronograph
People travelling East, for example from London to Hong Kong, should
pull the crown out to position 2 and move the hour hand forwards
(in this case by 8 hours). The table above can be used to calculate any
time difference.
People travelling West, for example from London to New York, should
pull the crown out to position 2 and move the hour hand backwards
(in this case by 5 hours). The table above can be used to calculate any
time difference.
In both cases, the '24-hour' hand allows travellers to read the time
back home – London, in our example – at a glance, using the 24-hour
scale on the dial. The second time zone – in this case Hong Kong or
New York – is read off the dial in the usual way. Each time the hour
hand crosses midnight, the date jumps forwards or backwards, depen-
ding on whether the hour hand is moved forwards or backwards.
The crown has 3 positions:
1.
Normal position (wearing position): when the crown is positioned
against the case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 44 hours
(calibres 1128, 2628) or 55 hours (calibre 3603) or more, wind it up
with the crown in position 1.
CALIBRE 1128 (fig. VI)
CALIBRE 3603 (fig. XX)
CALIBRE 2628 (fig. VII)
j
Self-winding GMT & GMT Chronograph
Operating instructions2
2. Setting the time zone: pull the crown out to position 2 and turn
it. Only the hour hand moves (clockwise or anticlockwise), without
affecting the precision of the minutes or seconds. If the hand moves
past midnight, the date changes automatically. Push the crown
back to position 1.
Correcting the date: pull the crown out to position 2, turn it
forwards or backwards to change the date each time the hour hand
passes midnight. The date moves forwards (or backwards) one day.
Repeat until the required date is obtained. Push the crown back to
position 1.
Synchronisation of the hour hand and the '24-hour' hand
(calibre 1128 - fig. VI)
The triangle on the rotating bezel must point to 12 o’clock on the
dial.
Pull the crown out to position 2 and turn it to synchronise the
hour hand with the time indicated by the '24-hour' hand on
the 24-hour scale on the rotating bezel. Make sure you set the
hour hand in the correct half of the day! Push the crown back to
position 1.
Synchronisation of the hour hand and the '24-hour' hand
(calibre 2628 - fig. VII, calibre 3603 - fig. XX)
Pull the crown out to position 2 and turn it to synchronise the hour
hand with the time indicated by the '24-hour' hand on the 24-hour
scale in the centre of the dial. Make sure you set the hour hand in
the correct half of the day!
After synchronising the hour hand with the '24-hour' hand, you
must set the local time on your watch. Push the crown back to
position 1.
3. Time setting: hours – minutes – seconds. Pull the crown to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back
to position 1 to coincide with a given time signal.
j
OMEGA_V12-I.indb Abs1:32-Abs1:33OMEGA_V12-I.indb Abs1:32-Abs1:33 28/12/09 18:30:3628/12/09 18:30:36
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 3220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 3220 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omega 3220

Omega 3220 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info