466687

Omega 3202 Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
30 31
English
1.3. Setting the date and hour hands:
Pull the crown out to position 2. Then turn the crown: the hand
moves in 1-hour jumps. If it is necessary to correct the date (A),
continue to turn the crown and the date will change automati-
cally when switching from AM to PM, or the contrary, depending
on the direction the crown is turned. Then push the crown back
to position 1.
Important: when setting the date, it is essential to check the
date. If need be, pass midday (no date change) or midnight (date
changes) to make sure the time is set in AM or PM as appropriate.
Note: corrections in position 3 have no effect on the date, even
if the hour hand passes midday or midnight. The watch stores
the date in its memory (including whether AM or PM) before the
time is reset. Setting the hours, minutes and seconds, around mid-
night and midday may therefore result in the calendar shifting by
12 hours.
2. Checking and correcting the calendar: month, yearly
cycle and date.
2.1. Display and correction of the month.
Press and hold the crown in position 0 for more than 3 seconds,
the month will be displayed for 8 seconds (B). 1 = January, 2 =
February, ..., 12 = December. The month can be corrected during
these 8 seconds. Pull the crown out to position 2, turn the hour
hand through one full revolution. The month will move forwards
or backwards.
Repeat the procedure until the required month is displayed, then
put the crown back to position 1.
Perpetual calendar
Operating instructions2
k
Í
2.2. Display and correction of the yearly cycle.
Following display of the month (cf. 2.1.), the calendar continues
to function and the year cycle is displayed in Roman numerals for
8 seconds (C).
I = leap year +1 example: 2005, 2009, 2013
II = leap year +2 example: 2006, 2010, 2014
III = leap year +3 example: 2007, 2011, 2015
IV = leap year example: 2004, 2008, 2012
During these eight seconds, you can adjust the year cycle. To
do so, pull the crown out to position 2, turn the hour hand through
one full revolution. The year cycle will move forwards or back-
wards.
Repeat the procedure until the required yearly cycle is displayed.
Push the crown back to position 1.
The calendar continues to function and displays the date (A).
See point 1.3. for how to correct the date.
2.3. Changing the time zone or daylight saving time:
Pull the crown out to position 2 and turn it. Only the hour hand
will move forwards or backwards, without affecting the minutes
or seconds. Push the crown back to position 1.
Note:
the end of battery life is indicated by the seconds hand
making 4-second jumps. The watch will continue to function for several
days, but the battery must be removed and replaced by an authorised
OMEGA service agent as soon as possible.
Once the watch stops, a memory function stores the date for one
month.
Perpetual calendar
Operating instructions2
k
OMEGA_V12-I.indb Abs1:30-Abs1:31OMEGA_V12-I.indb Abs1:30-Abs1:31 28/12/09 18:30:3528/12/09 18:30:35
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 3202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 3202 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info