466671
13
Zoom out
Zoom in
Previous page
1/24
Next page
26 27
English
Self-winding chronograph with date
Operating instructions2
Calibres 3888, 3890 (fig. XXI)
Correcting the day: pull the crown out to position 2, turn the
crown backwards, then push the crown back to position 1.
Note:
in the quick mode, the date is changed in two steps. Check
that the date hand (calibre 3888) or day disc plate (calibre 3890)
is centred after the change has been made.
Date-setting is not recommended between 10pm and 2am. During
this time lapse and under certain conditions, a safety element can
prevent these corrective functions from working.
3. Time setting: hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/8th of a second for up to 12 hours or up to 7 days for
calibres 3888 and 3890.
Pusher B: reset (after a stop).
Note:
the chronograph must always be stopped before the zero
resetting function is used. Never push the chronograph’s two pushers
(A and B) simultaneously (calibres 3301, 3303 and 3313).
Self-winding split-seconds chronograph
Operating instructions2
CALIBRE 3600 (fig. XVII)
CALIBRE 3612 (fig. XVIII)
Í
Watch functions (calibre 3600)
The crown has 2 positions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2. Time setting: hours – minutes – seconds. Pull the crown out to
position 2. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Watch functions (calibre 3612)
The crown has 3 positions:
1. Normal position (wearing position): when the crown is posi-
tioned against the case, the crown ensures that the watch is water-
resistant.
2. Correcting the date: pull the crown out to position 2, turn the
crown backwards, then push the crown back to position 1.
NB: the date cannot be corrected between 9pm and 12.30am.
3. Time setting: hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
Occasional winding: if the watch has not been worn for 45 hours
(calibre 3600) or 55 hours (calibre 3612) or more, wind it up with the
crown in position 1.
Chronograph functions:
Pusher A: start - stop, start - stop, etc.
Timing to 1/8th of a second for up to 12 hours.
OMEGA_V12-I.indb Abs1:26-Abs1:27OMEGA_V12-I.indb Abs1:26-Abs1:27 28/12/09 18:30:3328/12/09 18:30:33
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 2627 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 2627 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omega 2627

Omega 2627 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info