466679

Omega 2403 Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
18 19
English
Manual & Self-winding watch
Operating instructions2
2. Annual calendar: pull the crown out to position 2. Turn the
crown forwards to change the date or backwards to change the
month. Push the crown back to position 1.
Note: the day following 28 or 29 February (depending on
whether it is a leap year), the date needs to be adjusted by one
or two days (crown in position 2). Ideally, the date should be
adjusted after setting the time. When correcting the date between
midnight and 10am, the effort required for the first jump is
slightly greater than for the others.
3. Time setting: hours – minutes – seconds. Pull the crown out to
position 3, the seconds hand will stop. Turn the crown backwards
only. Synchronise the seconds by pushing the crown back to
position 1 to coincide with a given time signal.
NB: when changing the date backwards in time setting mode,
it is necessary to wind the hands back to 2pm to ensure the date
changes. Make sure the month has been set prior to setting the
time.
The crown has 3 positions, but only positions 1 and 3 are functional
for calibre 1120 jewellery version (fig. IV).
1. Normal position (wearing position): when the crown is
positioned against the case, the crown ensures that the watch is
water-resistant.
Occasional winding: if the watch has not been worn for
48 hours or more (calibres 8520, 8521: 50 hours; calibre 1120:
44 hours), wind it up with the crown in position 1.
Í
CALIBRES 1120, 2500, 2520, 2610, 8520, 8521 (fig. I)
CALIBRE 2627 (fig. III)
CALIBRE 2300 (fig. IX)
2. Correcting the date: pull the crown out to position 2, turn the
crown backwards and push it back to position 1.
For calibre 2610 only: date adjustment is made by instantaneous
jumps.
NB: date-setting is not recommended between 8pm and 2am.
3. Time setting: hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or
backwards. Synchronise the seconds by pushing the crown back
to position 1 to coincide with a given time signal.
Power reserve for calibre 2627:
• Counter at 9 o’clock: small seconds.
• Counter at 6 o’clock: power reserve
indicator.
When the watch is fully wound, the
power reserve indicator hand points
to 4/4. This means that the power
reserve is at least 44 hours.
Power reserve:
If the watch is not being worn, or during periods of low activity, the
power reserve indicator hand progressively moves anti-clockwise.
If the power reserve indicator hand is pointing to below 1/4, this
means that the watch’s power reserve is less than 10 hours. In this
case, the watch should be worn or wound by hand to prevent it from
stopping.
During manual winding (crown in position 1) or when worn (self-
winding), the power reserve indicator hand moves clockwise.
Manual & Self-winding watch
2 Operating instructions
Í
OMEGA_V12-I.indb Abs1:18-Abs1:19OMEGA_V12-I.indb Abs1:18-Abs1:19 28/12/09 18:30:2828/12/09 18:30:28
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Omega 2403 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Omega 2403 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Omega 2403

Omega 2403 User Manual - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info